NetComm NB5 manual Legal & Regulatory Information, Customer Information

Page 26

Legal & Regulatory Information

This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted under the Copyright Act, no part may be reproduced, stored in a retrieval system or transmitted in any form, by any means, be it electronic, mechanical, recording or otherwise, without the prior written permission of NetComm Limited. NetComm Limited accepts no liability or responsibility, for consequences arising from the use of this product.

NetComm Limited reserves the right to change the specifications and operating details of this product without notice.

NetComm is a registered trademark of NetComm Limited. All other trademarks are acknowledged the property of their respective owners.

Customer Information

ACA (Australian Communications Authority) requires you to be aware of the following information and warnings:

(1)This unit shall be connected to the Telecommunication Network through a line cord which meets the requirements of the ACA TS008 Standard.

(2)This equipment has been tested and found to comply with the Standards for C-Tick and or A-Tick as set by the ACA . These standards are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio noise and, if not installed and used in accordance with the instructions detailed within this manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur with the installation of this product in your home or office. If this equipment does cause some degree of interference to radio or television reception, which can be determined by turning the equipment off and on, we encourage the user to try to correct the interference by one or more of the following measures:

Change the direction or relocate the receiving antenna.

Increase the separation between this equipment and the receiver.

Connect the equipment to an alternate power outlet on a different power circuit from that to which the receiver/TV is connected.

Consult an experienced radio/TV technician for help.

(3)The power supply that is provided with this unit is only intended for use with this product. Do not use this power supply with any other product or do not use any other power supply that is not approved for use with this product by NetComm. Failure to do so may cause damage to this product, fire or result in personal injury.

NB5 Quick Start Guide

YML763Rev226

www.netcomm.com.au

 

Image 26
Contents Page Legal & Regulatory Information Customer InformationContents Overview NB5 Package Contents Minimum System Requirements Do I need a Micro filter? LED Indicators PPPReset Back Panel PortsRestoring Factory Defaults Default Settings LAN ManagementConnecting your NB5 Connecting your NB5 Adsl Modem via EthernetConnecting your NB5 Adsl Modem via USB Installing the USB driver Windows 98/Me/2000/XP onlyConfiguring your NB5 TIP Windows 2000 PCs Computer Hardware ConfigurationWindows XP PCs Windows Me PCsWindows 95, 98 PCs Can’t connect to the Adsl Router Appendix a TroubleshootingAdsl Router is not functional DSL Link LED continues to blink but does not go solidAdsl Link LED is always off What is a DMZ? What is a firewall?What is NAT? Appendix B Adsl Router termsWhat is a Gateway? Appendix C Cable Connections RJ-45 Network PortsStraight and crossover cable configuration Cross-Over CablingUSB cable RJ11 connector and cableTo RJ-11 adapter Appendix D Registering your NetComm Product Contact InformationLegal & Regulatory Information Customer InformationProduct Warranty Limitations of Warranty