NetComm NB5 manual LED Indicators, Ppp

Page 8

LED Indicators

The LED Indicators are located on the front of the unit and are green in colour, except the Power LED which is red. The meanings are as follows:

Label	Status	Indicates
Power	On	Power is on.
	Off	Power is off.
PPP	Flashing	Trying to authenticate with ISP’s PPP server.
	On	PPP link is up.
	Off	No PPP link available.
ADSL	On	A valid ADSL connection.
	Flashing	An active WAN session.
USB	On	PC connected to USB port.
	Flashing	Data is being transmitted between NB5 and
		PC.
	On	Indicates a link to your LAN or Network
		card is active.
	Off	Indicates no link to LAN.
Ethernet	Flashing	Flashes when data is being sent or received
		on the LAN connection.
	On	Indicates a link to your LAN or Network
		card is active.
	Off	Indicates no link to LAN.

NB5 Quick Start Guide	YML763Rev28
www.netcomm.com.au

Image 8

Contents Page Legal & Regulatory Information Customer InformationContents Overview NB5 Package Contents Minimum System Requirements Do I need a Micro filter? LED Indicators PPPReset Back Panel PortsRestoring Factory Defaults Default Settings LAN ManagementConnecting your NB5 Connecting your NB5 Adsl Modem via EthernetConnecting your NB5 Adsl Modem via USB Installing the USB driver Windows 98/Me/2000/XP onlyConfiguring your NB5 TIP Computer Hardware Configuration Windows XP PCsWindows 2000 PCs Windows Me PCsWindows 95, 98 PCs Appendix a Troubleshooting Adsl Router is not functionalCan’t connect to the Adsl Router DSL Link LED continues to blink but does not go solidAdsl Link LED is always off What is a firewall? What is NAT?What is a DMZ? Appendix B Adsl Router termsWhat is a Gateway? Appendix C Cable Connections RJ-45 Network PortsStraight and crossover cable configuration Cross-Over CablingUSB cable RJ11 connector and cableTo RJ-11 adapter Appendix D Registering your NetComm Product Contact InformationLegal & Regulatory Information Customer InformationProduct Warranty Limitations of Warranty