NetComm Liberty Series - 3G Wireless N300 Router
PPTP
PPTP (Point to Point Tunneling Protocol) allows for a secure connection over the Internet by simply dialing in a local point provided by your ISP provider. The following screen allows client PCs to establish a normal PPTP session and provides
Name | description |
|
|
Server IP address: | Type in the server IP address assigned by your Internet Service Provider. |
|
|
PPTP Account/ | Type in the username and password assigned by your provider. |
Password: |
|
|
|
Address Mode: | Select Dynamic if your service uses a DHCP server, or select Static and type in the |
| IP address, Subnet Mask and Default Gateway assigned by your Internet Service |
| Provider. |
|
|
Operation Mode; There are 3 options: | |
|
|
‘Keep Alive’ - | Keeps the Internet connection alive, does not disconnect. |
|
|
‘On Demand’ - | Only connects to the Internet when there’s a connect attempt |
|
|
‘Manual’ - | Only connects to the Internet when the ‘Connect’ button on this page is pressed, |
| and disconnects when the ‘Disconnect button is pressed. |
|
|
MAC Clone: | Please input the MAC address of your computer here, if your service provider only |
| permits computers with a certain MAC address to access Internet. If you’re using |
| the computer which used to connect to Internet via cable modem, you can simply |
| press ‘Fill My MAC’ button to fill the MAC address field with the MAC address of your |
| computer. |
|
|
Click Apply to save the settings.
WAN Failover Backup
The WAN Failover Backup feature of the 3G18Wn is designed to provide a backup 3G Internet connection in case your primary connection should fail. To use this feature, you will need both an Ethernet WAN connection (from an xDSL modem/ISDN/Satellite etc) and a 3G WAN connection.
To set up WAN failover on your 3G Router, first tick “Enable automatic 3G backup”, then fill in the fields that appear.
Name | description |
|
|
Internet Host: | Enter an Internet address here to check the Internet connection |
|
|
APN: | Enter the APN for your 3G USB modem |
|
|
User Name: | Enter your 3G username |
|
|
Password: | Enter your 3G password |
|
|
Click Apply to save the settings. |
|
|
|
YML18WN | 3G18Wn User Guide |
www.netcomm.com.au | 19 |