NetComm 802.11 manual Legal & Regulatory Information, Product Warranty

Page 75

802.11n Wireless Router

Legal & Regulatory

Information

This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted under the Copyright Act, no part may be reproduced, stored in a retrieval system or transmitted in any form, by any means, be it electronic, mechanical, recording or otherwise, without the prior written permission of NetComm Limited. NetComm Limited accepts no liability or responsibility, for consequences arising from the use of this product.

NetComm Limited reserves the right to change the specifications and operating details of this product without notice.

NetComm is a registered trademark of NetComm Limited.

All other trademarks are acknowledged the property of their respective owners.

Product Warranty

The warranty is granted on the following conditions:

1.This warranty extends to the original purchaser (you) and is not transferable;

2.This warranty shall not apply to software programs, batteries, power supplies, cables or other accessories supplied in or with the product;

3.The customer complies with all of the terms of any relevant agreement with NetComm and any other reasonable requirements of NetComm including producing such evidence of purchase as NetComm may require;

4.The cost of transporting product to and from NetComm’s nominated premises is your responsibility; and,

5.NetComm does not have any liability or responsibility under this warranty where any cost, loss, injury or damage of any kind, whether direct, indirect, consequential, incidental or otherwise arises out of events beyond NetComm’s reasonable control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or military authorities, fire, floods, electricity outages, lightning, power surges, or shortages of materials or labour.

6.The customer is responsible for the security of their computer and network at all times. Security features may be disabled within the factory default settings. NetComm recommends that you enable these features to enhance your security.

The warranty is automatically voided if:

1.You, or someone else, use the product, or attempts to use it, other than as specified by NetComm;

2.The fault or defect in your product is the result of a voltage surge subjected to the product either by the way of power supply or communication line, whether caused by thunderstorm activity or any other cause(s);

3.The fault is the result of accidental damage or damage in transit, including but not limited to liquid spillage;

4.Your product has been used for any purposes other than that for which it is sold, or in any way other than in strict accordance with the user manual supplied;

5.Your product has been repaired or modified or attempted to be repaired or modified, other than by a qualified person at a service centre authorised by NetComm; and,

6.The serial number has been defaced or altered in any way or if the serial number plate has been removed.

YML800NX

Powern User Guide

www.netcomm.com.au

5

Image 75
Contents User Guide Contents 802.11n Wireless Router 73 got Introduction Package Contents Your NetComm Powern Series RouterFeatures Advantages Key FeaturesAvoid Obstacles and Interference Router PlacementCordless Phones Choose the Quietest Channel for your Wireless NetworkProduct Layout Modem Requirements Network + System RequirementsConnecting your Router PC Network Adapter setup Windows XP Configuring your RouterSelect the General tab Please select both Open a web browser Internet Explorer, Firefox, etc Setting up your RouterPowern Series User Guide 802.11n Wireless Router Powern Series User Guide AP Router Mode Login Procedure AP Router Mode Advanced FeaturesSystem StatusSystem Powern Series User Guide LAN Dhcp Click Apply button to save the changed configurationSchedule Monitor Event LogWizard Dynamic IP InternetPoint-to-Point over Ethernet Protocol PPPoE Static IPPoint-to-Point Tunneling Protocol Pptp Wireless Settings BasicGHzG If all your clients are 802.11g, select this one WDS with AP Router Advanced TX Power This can be set to a bare minimum or maximum powerSecurity WEP Encryption WPA-Radius Encryption WPA Pre-Shared Key EncryptionRemove an address from the list MAC Address FilteringWi-Fi Protected Setup WPS Client List Firewall Settings Demilitarized Zone DMZ Denial of Service DoS MAC Filter Remove PC IP Address Enable IP Filtering Check to enable or disable IP FilteringIP Filter Add PC IP AddressURL Filter Network Address Translation NAT Advanced SettingsRemove Port Mapping Port MappingPort Forwarding Virtual Server Remove Port Forwarding Add Port ForwardingPort Triggering Special Applications Remove Port Triggering Add Port TriggeringUpnp Application Layer Gateway ALGPort-based QoS Quality of Service QoSPriority Queue Type Application-based QoSBandwidth Allocation Disabled This could turn off QoS feature Routing Tools Settings AdminRemote management Time Ddns Diagnosis PowerBack-up FirmwareReset Repeater Mode Repeater Mode Advanced Features LAN Language Wireless Client List Tools This section has many useful and miscellaneous featuresTime Diagnosis Back-up Legal & Regulatory Legal & Regulatory Information Product WarrantyLimitations of Warranty 802.11n Wireless Router Product Warranty Technical Support

802.11 specifications

NetComm 802.11 refers to the standards established under the IEEE 802.11 family, which governs wireless networking technologies. This set of protocols enables wireless communication between devices, including computers, smartphones, and IoT devices, providing the foundation for Wi-Fi technology. Understanding the main features, technologies, and characteristics of NetComm 802.11 is essential for leveraging its potential in modern networking.

One of the primary features of NetComm 802.11 is its ability to support various frequency bands, primarily operating in the 2.4 GHz and 5 GHz bands. The 2.4 GHz band offers extensive coverage and is ideal for penetrating walls and obstacles, catering to a more extensive range of devices. In contrast, the 5 GHz band provides faster data rates and less interference from other household devices, making it suitable for high-bandwidth applications like video streaming and online gaming.

Technically, the 802.11 standard has evolved through multiple amendments, with notable versions including 802.11n, 802.11ac, and 802.11ax (Wi-Fi 6). 802.11n introduced Multiple Input Multiple Output (MIMO) technology, which utilizes multiple antennas for transmitting and receiving data, significantly enhancing throughput and coverage. 802.11ac further increased data rates with wider channels and advanced modulation techniques, achieving speeds up to 1 Gbps or more. The latest 802.11ax, or Wi-Fi 6, optimizes performance in congested environments through technologies like Orthogonal Frequency Division Multiple Access (OFDMA) and improved MIMO capabilities.

Another characteristic of NetComm 802.11 is its implementation of security protocols. The standard provides several encryption methods, including WEP, WPA, and WPA2, which have evolved to provide more robust security against unauthorized access. WPA3 is the latest standard that enhances protection against brute-force attacks and improves user experience with simplified device onboarding.

In addition to security, NetComm 802.11 supports Quality of Service (QoS) protocols, which prioritize bandwidth for critical applications, ensuring smoother performance for voice and video communications. The introduction of mesh networking capabilities has further revolutionized how Wi-Fi networks can be deployed, allowing for seamless coverage across large areas without dead spots.

In summary, NetComm 802.11 underpins the essential functionalities of wireless networking. Its versatility in frequency bands, progressive technological advancements, strong focus on security, and support for QoS make it a vital standard for modern connectivity, catering to the increasing demands for speed, reliability, and security in a degital world.