NetComm 802.11 manual Repeater Mode Advanced Features

Page 65

802.11n Wireless Router

Repeater Mode –

Advanced Features

Repeater mode has limited settings compared to the AP mode. Choose “Repeater mode” on the top right corner of the configuration page. System restarts and connects to the IP address http://192.168.20.1

You will see the configuration homepage under “REPEATER” mode now.

System

Status

System status section allows you to monitor the current status of your router. You can use the status page to quickly see if you have any updated firmware available (bug fixes, updates). You can navigate from this page with a few interesting options for reminding or skipping this page forever & so forth.

Once you click on <OK> button to go to the requested page, you can see the status page of the 800n Series. You can see the UP time, hardware information, serial number as well as firmware version information.

LAN Settings: This page displays the Broadband router LAN port’s current LAN & WLAN information. It also shows whether the DHCP Server function is enabled / disabled. Wireless configuration details such as SSID, Security settings, BSSID, Channel number, mode of operation are briefly shown.

WLAN Settings: View Broadband router’s current configuration settings. Device Status displays the configuration settings you’ve configured in the Wizard / Basic Settings / Wireless Settings section

YML800NX	Powern User Guide
www.netcomm.com.au	5

Image 65

Contents User Guide Contents 802.11n Wireless Router 73 got Introduction Package Contents Your NetComm Powern Series RouterFeatures Advantages Key FeaturesAvoid Obstacles and Interference Router PlacementCordless Phones Choose the Quietest Channel for your Wireless NetworkProduct Layout Modem Requirements Network + System RequirementsConnecting your Router PC Network Adapter setup Windows XP Configuring your RouterSelect the General tab Please select both Open a web browser Internet Explorer, Firefox, etc Setting up your RouterPowern Series User Guide 802.11n Wireless Router Powern Series User Guide AP Router Mode Login Procedure AP Router Mode Advanced FeaturesSystem SystemStatus Powern Series User Guide LAN Dhcp Click Apply button to save the changed configurationSchedule Monitor Event LogWizard Dynamic IP InternetPoint-to-Point over Ethernet Protocol PPPoE Static IPPoint-to-Point Tunneling Protocol Pptp GHzG If all your clients are 802.11g, select this one Wireless SettingsBasic WDS with AP Router Advanced TX Power This can be set to a bare minimum or maximum powerSecurity WEP Encryption WPA-Radius Encryption WPA Pre-Shared Key EncryptionRemove an address from the list MAC Address FilteringWi-Fi Protected Setup WPS Client List Firewall Settings Demilitarized Zone DMZ Denial of Service DoS MAC Filter IP Filter Enable IP Filtering Check to enable or disable IP FilteringAdd PC IP Address Remove PC IP AddressURL Filter Network Address Translation NAT Advanced SettingsRemove Port Mapping Port MappingPort Forwarding Virtual Server Remove Port Forwarding Add Port ForwardingPort Triggering Special Applications Remove Port Triggering Add Port TriggeringUpnp Application Layer Gateway ALGPort-based QoS Quality of Service QoSPriority Queue Type Application-based QoSBandwidth Allocation Disabled This could turn off QoS feature Routing Remote management Tools SettingsAdmin Time Ddns Diagnosis Power Back-up FirmwareReset Repeater Mode Repeater Mode Advanced Features LAN Language Wireless Client List Tools This section has many useful and miscellaneous featuresTime Diagnosis Back-up Legal & Regulatory Legal & Regulatory Information Product WarrantyLimitations of Warranty 802.11n Wireless Router Product Warranty Technical Support