NetComm Liberty Series - Wireless N150 Router
Internet Settings
3G Internet Settings
This page allows you to setup your WWAN (Wireless Wide Area Network) connection. Enter the relevant settings as provided by your 3G provider.
Note For 3G WAN connection: The 3G connection fields may not be necessary for your connection. The information on this page will only be used when your service provider requires you to enter a User Name and Password to connect to the 3G network.
Name | description |
|
|
APN: | Enter the APN for your 3G USB modem |
|
|
User Name: | Enter your 3G username |
|
|
Password: | Enter your 3G password |
|
|
Operation Mode; There are 3 options: | |
|
|
‘Always On’ | Keeps the Internet connection alive, does not disconnect. |
|
|
‘OFF’ | Does not connect to the Internet. |
|
|
‘Automatic 3G Backup’ | The Automatic 3G Backup feature of the 3G17Wn is designed to provide a |
| backup 3G Internet connection in case your primary connection should fail. |
| To use this feature, you will need both an Ethernet WAN connection (from an |
| xDSL modem/ISDN/Satellite etc) and a 3G WAN connection. |
|
|
PIN: | Enter the Pin Code for your SIM card |
|
|
Note: For current APN’s of various providers, consult the Setting Up Your Router section of this user manual
WAN
Select the WAN connection type suitable for your environment and configure parameters according to the selected connection type.
STATIC (fixed IP)
If your WAN connection uses a static IP address, please select Static IP Address and fill in the required information in the fields provided.
Name | description |
|
|
IP Address: | Type in the IP address assigned by your Internet Service Provider |
|
|
Subnet Mask: | Type in the Subnet mask assigned by your Internet Service Provider |
|
|
Default Gateway: | Type in the WAN Gateway assigned by your Internet Service Provider |
|
|
Primary/ Secondary | Type in the DNS address assigned by your Internet Service Provider |
DNS: |
|
|
|
MAC Clone: | Please input the MAC address of your computer here if your service provider only permits |
| computers with a certain MAC address to access the Internet. If you are using the |
| computer which used to connect to the Internet via a cable modem, you can simply press |
| the ‘Default’ button to fill the MAC address field with the MAC address of your computer. |
|
|
Click Apply to save the settings.
YML1�7WN | NetComm Liberty Series 3G Wireless N150 Router |
www.netcomm.com.au | 19 |