Firewall
MAC/IP/Port Filtering
This page allows you to setup MAC, IP and port filtering rules to protect your network from malicious activity. The filtering rules can be used to either allow or block certain users and/or ports from accessing the Internet.
Basic Settings
Name | Description | |
|
|
|
MAC/IP/Port Filtering: | Select Enable to enable MAC/IP/Port Filtering | |
|
|
|
Default Policy: | Select whether packets that do not match any rules are accepted or dropped | |
|
|
|
|
| |
MAC/IP/Port Filtering Settings | ||
|
|
|
Name |
| Description |
|
|
|
MAC Address: |
| MAC address of a local computer |
|
|
|
Dest IP Address: |
| Destination IP Address for the filter rule |
|
|
|
Source IP Address: |
| Source IP Address for the filter rule |
|
|
|
Protocol: |
| Select the port number protocol type (TCP, UDP or both). If you are |
|
| unsure, then leave it to the default “TCP&UDP” setting |
|
|
|
Dest Port Range: |
| Destination Port Range of the filter rule |
|
|
|
Source Port Range: |
| Source Port Range of the filter rule |
|
|
|
Action: |
| Either accept or drop the packet that matches the rule |
|
|
|
Comment: |
| Add a comment to identify the rule (optional) |
|
|
|
Click Apply to save the settings.
NetComm Liberty Series 3G Wireless N150 Wireless Router | YMmL1�7WN |
32 | www.netcomm.com.au |