Net Optics N-IDP-POBPSX-001, N-IDP-POBPLX-002 manual Ips

Optical Bypass Switch

Connecting the Optical Bypass Switch to the In-line Security Device

1. .Connect Monitoring Port A to the in-line appliance Port A using a duplex SC-to-LC fiber cable. This will act as your DCE Interface.

2. .Connect Monitoring Port B to the in-line appliance Port B using a duplex SC-to-LC fiber cable. This will act as your DTE interface.

3. .Verify that the Switch Monitoring Ports are cabled in-line between two devices..

4. .Connect the power supply to the switch. .Make sure you connect the switches’ power supply to the same power sources that in-line appliance is using..

			1	Connect Fiber In-Line Ports
	Tx		DTE		Rx
	Rx				Tx
	Tx		DCE		Rx		Rack-Mount Frame
	Rx				Tx		Holds 2 Switches
					A	B	A A BB
				Switch	MS	MS	MS
						Network	Monitor
	A		B	A A BB
To	SM	SM	SM
	YS METS	Network		Monitor

switch, server,	B
or router	1x	2x	3x	4x	5x	6	x	7x
(DCE)

	Æ
	SIC SYOC SM
To	YS
	B

switch, server, or router	1x	2x	3x	4x	5x	6	x	x
(DTE)

	DCE
Tx	DTE
Rx
IPS
Tx
Rx

Figure 5..

2	Connect SC Fiber
	Cables

Rx

Tx

Rx

Tx