Net Optics N-IDP-POBPSX-001, N-IDP-POBPLX-002 manual Unpacking and Inspection

Page 8

Optical Bypass Switch

Unpacking and Inspection

Unpack the Optical Bypass Switch, power supply, and cables provided. .Each Optical Bypass Switch is delivered with the following:

For models N-IDP-POBPSX-001, N-IDP-POBPLX-002:

•1 DC power supply

•2 Duplex SC-SC fiber cables

•2 Duplex SC-LC fiber cables

•1 Manual

If any component is missing or damaged, contact Net Optics Customer Service immediately..

Connecting the Optical Bypass Switch to the Network

1. .Connect Network Port A to the appropriate switch, server or router device using a duplex SC fiber cable. This acts as your DCE interface.

2. .Connect Network Port B to the appropriate switch, server or router device using a duplex SC fiber cable. This acts as your DTE interface.

3. .Verify that the Bypass Switch Network Ports are cabled in-line between two devices..

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Guide for Optical Bypass Switch Table of Contents Trademarks and Copyrights Key Features IntroductionUninterrupted traffic Simply Plug It Ease of Use SupportProduct Diagram Power Loss Bypass Bypass Disabled ModeFor models N-IDP-POBPSX-001, N-IDP-POBPLX-002 Connecting the Optical Bypass Switch to the NetworkUnpacking and Inspection IPS Specifications Splitter SpecificationsOperating Specifications Mechanical SpecificationsLimitations on Warranty and Liability By Net Optics, Inc. .All Rights Reserved
Top Page Image Contents