N-Tron 405FXE-SC-YY, 405FX-ST, 405FXE-ST-YY manual Led, Color Description, Applying Power Side View

Page 10

LED’s: The table below describes the operating modes:

LED

Color

Description

 

GREEN

Power is Applied

 

 

 

 

OFF

Power is OFF

 

 

 

!

RED

Controller HW Error

 

 

 

OFF

No Errors. Normal

 

 

Operation.

 

 

 

LNK

GREEN

Link between ports

 

established

 

 

 

 

 

 

OFF

No Link between ports

 

 

 

ACT

GREEN

Data is active between

 

ports

 

 

 

 

OFF

Data is inactive between

 

 

ports

 

 

 

APPLYING POWER (Side View)

Unscrew & Remove the DC Voltage Input Plug(s) from the side header

Install the DC Power Cables into the Plug(s) (observing polarity).

Plug the Voltage Input Plug(s) back into the side header.

Tightening torque for the terminal block power plug is 0.22 Nm/0.162 Pound Foot. All LED’s will flash ON Momentarily (including the Error LED)

Verify the Power LED stays ON (GREEN).

Verify the Error LED is OFF (after a few seconds).

Note: Only 1 plug is required to be connected to power input for minimal operation. For redundant power operation, V1 and V2 plugs must be connected to separate DC Voltage sources. Use wire sizes 16-28 gauge.

Recommended 24V DC Power Supplies, similar to 100VAC/240VAC:

N-Tron’s NTPS-24-1.3, DC 24V/1.3A

(Revised 2010-11-15)

10

Image 10
Contents Installation Guide Where YY = -15, -40, or 405TX 405FX-SC 405FX-ST 405FXE-SC-YY 405FXE-ST-YYRevised Safety Warnings Electrical Safety405FX, 405FXE, & 405TX Industrial Ethernet Switches Key FeaturesInstallation Package ContentsUnpacking 405FX/405FXE Half Duplex Setup DIN-Rail Mounting Optional MountingLNK Front PanelFrom Left to Right ACTLED Applying Power Side ViewColor Description Tron Switch Grounding Techniques RJ45 Connector Crimp Specifications Support Connecting the UnitTroubleshooting FCC StatementKEY Specifications Regulatory Approvals GOST-R CertifiedTron Limited Warranty

405FXE-ST-YY, 405FX-SC, 405FX-ST, 405FXE-SC-YY specifications

The N-Tron 405FXE-SC-YY, 405FX-ST, 405FX-SC, and 405FXE-ST-YY are advanced series of industrial Ethernet switches developed by N-Tron, a renowned name in network solutions for harsh environments. These devices are engineered to provide robust and reliable connectivity for mission-critical applications in manufacturing, transportation, and other demanding industries.

One of the key features of the N-Tron 405FXE-SC-YY and its counterparts is their support for Gigabit Ethernet on all ports, allowing for high-speed data transfer. This ensures that large volumes of data can be processed efficiently in real-time, making these switches ideal for applications requiring low latency and high bandwidth.

The 405FX series is built with a rugged metal housing, which enhances its resilience against harsh environmental conditions. With an extended operating temperature range, these switches can function in temperatures from -40°C to +85°C, making them suitable for deployment in extreme settings, from outdoor installations to facilities prone to temperature fluctuations.

Another important characteristic of the N-Tron series is their advanced Layer 2 switching capabilities. They support various networking protocols such as IEEE 802.1Q VLAN tagging, which allows for segmented traffic for enhanced security and performance. The switches are also capable of rapid spanning tree protocol (RSTP), improving network redundancy and minimizing downtime.

The inclusion of features like Power over Ethernet (PoE) in models such as the 405FXE-ST-YY enables the powering of devices like IP cameras and access points directly through the Ethernet cable. This simplifies installation and reduces the need for additional power supplies, which is particularly advantageous in expansive networks.

Furthermore, the N-Tron 405FX series boasts plug-and-play functionality for easy installation and maintenance. The switches come equipped with LED indicators that provide real-time status updates, facilitating quick troubleshooting.

In summary, the N-Tron 405FXE-SC-YY, 405FX-ST, 405FX-SC, and 405FXE-ST-YY series stand out for their high-speed performance, robust build quality, and advanced networking features. They provide a reliable solution for industrial environments that require seamless connectivity and minimal downtime, ensuring critical operations can continue without interruption.