USER GUIDE
11.2.1Configuring individual input ports
Configure the input ports to display the DX User icon. To configure the input ports:
1.On the picture of the switch in the DX System Configuration window, click an input port . The Configuration box appears see Figure 28.
Figure 28 Configuration box
2.Input Type - From the menu select User Unit. The Configuration box now appears as in Figure 29.
Figure 29 Configuration box
3.KB Mode – This setting refers to the operating system of an optional local computer connected to a DX User. When there is no local computer you can ignore this setting.
The system operates with all major operating systems. By default the KB mode is set to PS/2 which is suitable for most operating systems.
Listed below is the keyboard mode for particular UNIX systems:
∙U1 for HP UX
∙U2 for Alpha UNIX, SGI, Open VMS
∙U3 for IBM AIX
Set the KB mode according to above list.
28