Minicom Advanced Systems DX System manual Changing the cascade status

Page 23

USER GUIDE

9.The DX Central slave must have a different IP address than the primary DX Central, but it must be on the same subnet. Type suitable network parameters for the DX Central slave into the DX Network Configuration box.

10.Click . The Define DX status box appears. See Figure 20.

11.Select Slave and click . The following box appears.

Figure 21 Primary DX unit IP address box

12.Type in the IP address of the primary DX Central unit.

13.Click . The Login screen appears. 14.Power off the DX User and disconnect it from the slave.

Repeat the above procedure for each slave, and give each one a unique IP address.

7.4 Changing the cascade status

The Configuration wizard only appears automatically the first time you connect and switch on a DX Central. When you change the cascade status of the DX system, e.g. by adding or removing an already configured DX Central, you configure the new cascade status in the same way as above, by connecting a DX User to the newly added DX Central. You then invoke the Configuration wizard from the Settings window. This is explained on page 44 – (Configure cascade options).

7.5 Connecting the DX Users when cascading

Once all the slaves are configured, connect all DX Users to the primary DX Central.

For each DX User in the system connect a CAT5 cable from the primary DX Central Server port to each DX Central secondary level User port. Figure 16 shows the CAT5 cables for 1 cascaded DX Central. Figure 17 shows CAT5 cables for 2 cascaded DX Centrals.

22

Page 22 Page 24
Image 23
Page 22 Page 24
Contents DX System User Guide Table of Contents Creating/editing Users and Groups Upgrading from V1.9 to DX Central Update Trademarks Technical precautionsWelcome Introduction FeaturesSystem components Pre-installation guidelinesAvoiding general rack mounting problems Elevated operating ambient temperatureCircuit overloading Reduced airflowMechanical loading DX Central DX system outlineUSB DX User unitsRack mounting the XRICCs Rack mounting the DX central and User unitsRack mounting the RICCs Connecting the DX systemXricc power supply Connecting an optional local computer to a DX UserConnecting servers to the DX Central DX Central Connecting a Ricc or Xricc PS/2Ricc / Xricc Connecting an Xricc SUNConnecting an Xricc RS232 Connecting an Xricc USBConnecting the DX User to an RS232 Terminal Connecting the CAT5 cablesTerminal Power managementCascading DX Central units Connecting Legacy KVM switchesDX Central Secondary level Connecting with an Ethernet Crossover cableCheck Cascaded DX configuration Configuring the primary and slave unitsDX Network Configuration Before logging in you must configure the slavesChanging the cascade status Connecting the DX Users when cascadingConnecting servers/devices in a cascaded system Powering on the systemConfiguration wizard non-DX cascaded system Logging Configuring the DX systemAuto detecting system components DX System Configuration windowGeneral tab elements Computer Port Configuration boxApplying changes RS232 Terminal settingsConfiguring individual input ports DX Central 1st level Cascaded DX Central unitsLeft Port No This is the Server port number DX System Cascade Inputs Cascaded Legacy switchesAdd New KVM Device box Adding a Legacy switch typeTo Server Properties box Method aCascade Inputs box Method BConfiguring the server ports HotKey keyboard Power device settings box elements Configuring a Power management deviceAdd New Power Profile box Add New Power profile box elementsConfiguring the connected servers Dual Power devices Other settings to configureAdmin User name Settings 11.6.3 IP/Cascade Settings Creating/editing Users and Groups Group Access rights Creating Groups Toolbar buttonsGeneral information tab elements Creating Users Editing Group access rightsAdd New User box Users and Groups Details view Arranging devicesIcon Meaning Servers windowCreating a new folder Servers/devices display options Saving changesDeleting and renaming folders Adding devices to a folderAccessing devices Scanning a group of servers Power on/off, rebootAdjusting the picture quality Disconnect User Connecting to a local computerSystem requirements for the DX Central Update program Connect PrivateDX Central IP address Running the DX Central UpdateDX Central Update ∙ Ricc PS/2 Updating the DX User and XRICCS/RICCsUpdate window DDC buttons Events logLog window Configuring Log TrapsSaving the Log Troubleshooting Resetting the DX CentralClearing the Log SUN key Combo key USB / SUN Combo keysDX units Technical specificationsSystem SUN USB Terminal hotkeysUser guide feedback Germany France Italy DX System

DX System specifications

Minicom Advanced Systems DX System is a cutting-edge solution designed to streamline the management and monitoring of IT infrastructure, particularly in data centers and remote environments. This system exemplifies a robust integration of advanced technologies aimed at enhancing operational efficiency and reducing downtime.

One of the hallmark features of the DX System is its KVM (Keyboard, Video, Mouse) over IP capabilities, which allows IT professionals to access and control multiple servers and devices from a centralized location. This remote access is not only convenient but vital for organizations that require constant monitoring and management, enabling support teams to troubleshoot and resolve issues without the need for physical presence.

The DX System is built on a highly scalable architecture, accommodating a wide range of configurations. This scalability ensures that organizations can expand their operations without needing to overhaul existing systems. With support for both physical and virtual servers, the system offers versatility that meets diverse computing needs.

Another significant characteristic of the DX System is its enhanced security protocols. The system utilizes robust encryption methods and secure login processes, ensuring that sensitive data remains protected from unauthorized access. Additionally, features such as user authentication and logging provide an audit trail, facilitating compliance with various industry regulations.

Minicom's Advanced Systems DX also incorporates advanced monitoring and alerting solutions that provide real-time insights into system performance. These tools allow administrators to proactively identify potential issues before they escalate into critical problems, thereby minimizing downtime and enhancing reliability.

The DX System is engineered with user experience in mind, featuring an intuitive interface that simplifies navigation and configuration. Administrators can easily set up and manage their environments, ensuring that they can focus on strategic initiatives rather than getting bogged down by technical complexities.

In summary, the Minicom Advanced Systems DX System stands out as a powerful tool for IT management, offering KVM over IP capabilities, scalability, robust security measures, and advanced monitoring tools. Combined with its user-friendly design, the DX System empowers organizations to optimize their IT infrastructure efficiently and effectively. As businesses continue to confront the challenges of modern computing, solutions like the DX System will play a critical role in elevating operational performance and ensuring seamless connectivity across all systems.
Top Page Image Contents