Fiber Driver
EM316E1/EM316T1
1 INTRODUCTION
About this Manual
Before unpacking please refer to section 2 (Hardware Installation)
This manual is a guide to the installation and operation of the EM316E1/T1 Fiber Modem.
Product description describes the product, its functions, features, protocol supported, minimum requirements, and typical applications.
Installation guides you through the setup of the EM316E1/T1 to your network.
Customer support provides information on return policy and customer support information.
Glossary provides definition to terms used in this manual.
Product Description
The EM316T1 and the EM316E1 modules of the Fiber Driver Family are Fiber Modems designed to extend the distance and transmission reliability of T1 (1.544Mbps) or E1 (2.048Mbps) traffic. These units convert the electrical signals to optical signals and transmit them over distances of up to 4km on multimode fiber, or distances of up to 100km on singlemode fiber. The EM316T1 and EM316E1 are transparent to the framing format, and support AMI or B8ZS (T1) and HDB3 (E1) line codes respectively. They include an internal elastic buffer to remove jitter from transmit data. Six LED indicators help monitoring and
The EM316E1/T1 single fiber modules use unique technology that provides the ability to combine TX and RX signals onto a single fiber strand. This effectively doubles the available fiber in a network and eliminates the need for additional fiber connections. An identical unit is required on the other end, using either standard APC (Angled PC) patch cords finish or a 3M VAR APC finish. The standard APC finish provides a
The Fiber Driver family provides conversion solutions with greater distances and better manageability than any other products on the market. Multimode to Singlemode fiber conversion modules offers link distances from 0 km to 100 km.
P/N: | PAGE 5 |