RouteFinder Quick Start Guide
6.The Setup Wizard: Device IP Address dialog box displays.
Enter your local internal network’s IP address for this device.
The Setup Wizard will automatically detect the first three octets of your local IP address. You must enter the last octet only.
If you wish, you can change the network name of your RouteFinder. If you are connecting to an ISP, the device name can act as your computer name if it is required on the remote system.
Click Next to continue. The device will search the network to ensure that the IP address is valid. This may take several seconds.
Note: If your ISP provided you with an IP address, do not enter that address. Enter the IP address for this device on your local network. Refer to the Glossary in the User Guide for additional information on IP addressing.
10