Bel Canto Design manual CD-2 Operation as Digital Transport, CD-2 Operation as CD Player

Page 10

CD-2 Operation as Digital Transport

The CD-2 produces a low jitter 24/96 data-stream from any of the 3 digital out- puts. 110 ohm AES/EBU balanced, 75 ohm BNC SPDIF or the high speed TOSLINK output can be used as required. Any or all of the outputs can be connected to any digital playback device.

While using the CD-2 as a Digital Source you can disable the analog out- put section by selecting Variable Output,

scrolling the Volume control level to 0.0 then pressing the Fixed/Variable button IN to the Fixed position.

Note that if your external DAC does not accept 96kHz data then you can set the sample rate to 48kHz. See page 12 for further information.

A BNC to RCA female adaper is includ- ed for use with RCA terminated cables on the SPDIF digital output.

CD-2 Operation as CD Player

The high dynamic range analog outputs of the CD-2 can be used to drive an amplifier directly. This is best achieved by using the 4Vrms balanced outputs directly into the balanced inputs of your power amplifier.

Place the Fixed/Variable button in the OUT position. You can then control the volume level of your CD playback through the volume control of the CD-2. The RCA outputs can also be used directly into the RCA jack of an amplifier with 6 dB lower output level.

For use into an analog preamplifier scroll the volume level to 100.0 and press the Fixed/Variable button to the IN position and use the volume control on the analog preamplifier to control system level.

Note that if you are only using the ana- log outputs on the CD-2 you may want to try setting the sample rate to 192kHz for optimum sound quality. See page 12 for further information.

© 2007 bel canto design, Ltd.

page 11

CD-2 User’s Guide 0607revA

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CD-2 Users GuideWarranty Information CD-2Unpacking your CD-2 Power ConnectionNever Pack the CD-2 with the Magnetic Puck on the Turntable Design Features Placement and Initial SetupConditioning Never Remove the CD-2 MAG- Netic Puck while the CD is Spin CD-2 Care and WarningsDo not Attempt to Operate the CD-2 Without a CD in Place There are no fuses inside the CDCD-2 in Variable Output Mode Fixed/Variable OUT CD-2 Operating Mode DisplayCD-2 in Fixed Output Mode Fixed/Variable CD-2 Front Panel OperationCD-2 Remote Control Operation CD-2 Remote Control Operation CD-2 Remote Control BelecantoCD-2 Operation as Digital Transport CD-2 Operation as CD PlayerDigital outputs are disabled when the 192 rate is chosen CD-2 Sample Rate SettingChanging the Sample Rate set- ting CD-2 Operation Notes CD-2 Front and Back Panel CD-2 Specifications Digital Outputs

CD-2 specifications

The Bel Canto Design CD-2 is a high-performance CD player that embodies the principles of superior audio design and precision engineering. Recognized by audiophiles for its outstanding sound quality and innovative features, the CD-2 represents a significant advance in digital playback technology. With a focus on converting digital signals into a rich, analog-like experience, the CD-2 showcases Bel Canto's commitment to excellence in audio reproduction.

One of the standout features of the CD-2 is its advanced digital architecture. It utilizes a high-performance DAC (Digital-to-Analog Converter) that supports a variety of media formats, ensuring that listeners can enjoy their music collection with exceptional clarity and detail. The DAC is coupled with an innovative, low-jitter clocking system that minimizes timing errors, allowing for more accurate sound reproduction. This meticulous attention to timing translates into a soundstage that is both wide and deep.

Another key characteristic of the CD-2 is its robust construction. Built using high-quality materials, the player is designed to reduce resonance and vibrational interference, which can adversely affect sound quality. The internal layout is optimized for signal integrity, with carefully routed circuitry that enhances performance. This engineering precision is complemented by a sleek, minimalist design that looks elegant in any audio setup.

The CD-2 also features an intuitive user interface that includes a well-organized remote control, allowing for easy navigation through CDs and playlists. Its compatibility with a range of CD formats, including standard audio CDs and CD-Rs, provides versatility for users. Additionally, the CD-2 is equipped with digital inputs, enabling it to serve as a standalone DAC for other digital sources, further enhancing its utility in modern audio systems.

Overall, the Bel Canto Design CD-2 is not just a CD player; it's a sophisticated audio component that delivers a true high-fidelity experience. By marrying cutting-edge technology with exceptional craftsmanship, the CD-2 stands out as a premier choice for audiophiles seeking to elevate their music enjoyment. Whether you are rediscovering your CD collection or integrating it into a contemporary digital setup, the Bel Canto Design CD-2 promises to impress with its remarkable performance and rich sound quality.
Top Page Image Contents