Bel Canto Design manual CD-2 Front Panel Operation, CD-2 Operating Mode Display

Page 6

CD-2 Front Panel Operation

CD-2 Operating Mode Display:

Several Operating Modes are displayed using the left-most 7-segment display:

Two Vertical Lines Indicate Pause, a Square indicates Stop, a Blinking Segmented Square indicates Play.

Standby is indicated by two dashes - -

CD-2 in Fixed Output Mode (Fixed/Variable IN):

Upon application of power the CD-2 goes through a display check and comes up in Standby, indicated by two dashes on the display - -.

Place a CD on the CD-2 and then place the magnetic puck on the CD. It will automatically center and clamp itself in place.

Press the center of the front panel control for 2-3 seconds, you will then see the firmware revision displayed for a couple of seconds and the CD will spin while 4 dashes are displayed. Once the CD Table Of Contents is read the display will indicate the total CD time and the number of tracks.

A 01 display indicating track 1 with 2 vertical dashes in the left hand mode indicator display will indicate that the CD-2 is in Pause mode and is ready to play the CD.

Initiate Play by pressing the front panel control once. Scan to a new track by

rotating the control. This works while in Pause, Play or Stop modes.

To Pause while playing press the con- trol once.

To Stop at any time press the control twice. The CD-2 will remain on the cur- rent track on re-start the track when Play is started.

A center press on the control will be acknowledged by the display brighten- ing momentarily.

When in Play mode the mode indicator shows a square with sequenced blinking segments.

Stop is indicated by a stationary square. The CD will be stopped. In Play and Pause modes the CD will continue to rotate.

CD-2 in Variable Output Mode (Fixed/Variable OUT):

Operation will be the same as above accept that rotating the front panel con- trol while in Stop or Play mode will indi- cate the volume level and then change the volume up or down as the control is rotated.

Rotating the control in Pause mode will change the track number to be played. The volume display will stay lit for sever- al seconds and then the display will go back to the mode indicator/track num- ber display.

© 2007 bel canto design, Ltd.

page 7

CD-2 User’s Guide 0607revA

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CD-2 Users GuideWarranty Information CD-2Power Connection Unpacking your CD-2Never Pack the CD-2 with the Magnetic Puck on the Turntable Placement and Initial Setup Design FeaturesConditioning Never Remove the CD-2 MAG- Netic Puck while the CD is Spin CD-2 Care and WarningsDo not Attempt to Operate the CD-2 Without a CD in Place There are no fuses inside the CDCD-2 in Variable Output Mode Fixed/Variable OUT CD-2 Operating Mode DisplayCD-2 in Fixed Output Mode Fixed/Variable CD-2 Front Panel OperationCD-2 Remote Control Operation CD-2 Remote Control Operation CD-2 Remote Control BelecantoCD-2 Operation as Digital Transport CD-2 Operation as CD PlayerCD-2 Sample Rate Setting Digital outputs are disabled when the 192 rate is chosenChanging the Sample Rate set- ting CD-2 Operation Notes CD-2 Front and Back Panel CD-2 Specifications Digital Outputs

CD-2 specifications

The Bel Canto Design CD-2 is a high-performance CD player that embodies the principles of superior audio design and precision engineering. Recognized by audiophiles for its outstanding sound quality and innovative features, the CD-2 represents a significant advance in digital playback technology. With a focus on converting digital signals into a rich, analog-like experience, the CD-2 showcases Bel Canto's commitment to excellence in audio reproduction.

One of the standout features of the CD-2 is its advanced digital architecture. It utilizes a high-performance DAC (Digital-to-Analog Converter) that supports a variety of media formats, ensuring that listeners can enjoy their music collection with exceptional clarity and detail. The DAC is coupled with an innovative, low-jitter clocking system that minimizes timing errors, allowing for more accurate sound reproduction. This meticulous attention to timing translates into a soundstage that is both wide and deep.

Another key characteristic of the CD-2 is its robust construction. Built using high-quality materials, the player is designed to reduce resonance and vibrational interference, which can adversely affect sound quality. The internal layout is optimized for signal integrity, with carefully routed circuitry that enhances performance. This engineering precision is complemented by a sleek, minimalist design that looks elegant in any audio setup.

The CD-2 also features an intuitive user interface that includes a well-organized remote control, allowing for easy navigation through CDs and playlists. Its compatibility with a range of CD formats, including standard audio CDs and CD-Rs, provides versatility for users. Additionally, the CD-2 is equipped with digital inputs, enabling it to serve as a standalone DAC for other digital sources, further enhancing its utility in modern audio systems.

Overall, the Bel Canto Design CD-2 is not just a CD player; it's a sophisticated audio component that delivers a true high-fidelity experience. By marrying cutting-edge technology with exceptional craftsmanship, the CD-2 stands out as a premier choice for audiophiles seeking to elevate their music enjoyment. Whether you are rediscovering your CD collection or integrating it into a contemporary digital setup, the Bel Canto Design CD-2 promises to impress with its remarkable performance and rich sound quality.
Top Page Image Contents