Chapter 2 - Installation
Install the Modem Driver
Introduction
Compatibility: This MultiModem is compatible with Windows Operating Systems Vista/XP/2003/2008 and Linux.
Windows Drivers: The MultiModem product driver must be installed in your computer’s program directory. The Windows drivers are located on the MultiModem product CD in the DriversIWindows Drivers folder. A complete set of drivers for each operating system is organized into Vista and XP with either
Most users will select either the
Linux Drivers: Linux Operating System drivers are also located on the CD in the DriversILinux Folder. Refer to the Readme file (also in the Linux directory) for the correct driver file and installation guide for your distribution/version of Linux.
Overview of Windows Driver Installation: Two install wizards guide you through the software Installation in this order:
Part A installs the Serial Port. Part B installs the modem driver.
Installing the Modem Driver in Windows Vista
Preliminaries
1.Power up your computer.
2.If you have not already done so, connect the modem’s USB cable to a USB port on the computer and connect the phone line between the modem and a telephone wall jack.
3.Windows will detect that the new modem is present.
Driver Installation of your TUSB3410 Serial Port
4.The Found New Hardware screen appears with Windows needs to install driver software for your TUSB3410 Serial Port.
Click on Locate and install driver software (recommended). Windows will guide you through the process of installing driver software for your device.
7 |