Multi-Tech Systems MT9234ZBA-USB manual

Page 9

Chapter 2 - Installation

7.At the Browse for driver software on your computer screen.

Click the Browse button.

8.Browse to the Drivers folder on your MultiModem product CD , then select the Windows_Drivers folder and then the Vista32 folder. If you were installing drivers on a Vista 64-bit Operating System, you would browse to the Vista64 folder. Click OK, then

Click Next.

9.Would you like to install this device software? screen appears.

Click Install.

Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D)

9

Image 9

Contents MultiModem ZBA MultiModem ZBA User Guide Contents Package Contents Features includeAT Commands Info Universal Serial Bus USBServer-to-Client Data Rates Technical SpecificationsUSB Connection Safety Warning TelecomLine Connection Phone ConnectionInstall the Modem Driver Installing the Modem Driver in Windows VistaIntroduction Choose Browse my computer for driver software advanced Page Installation Installing driver software… screen appears Installation of the Modem Page Installing the Modem Driver in Windows Server 2008,XP,2003 Page Select MT9234ZBA-USB MultiModem Click Continue Anyway Page Page Click Continue Anyway Page Using AT Commands to Configure Your Modem Using the Global Wizard to Configure Your ModemOperation Connecting to the InternetInternet Connection Setup Basic ProcedureChanging the Setup Password Changing the Remote Escape CharacterNone of the Indicators Light Modem Does Not Respond to CommandsModem Dials But Cannot Connect Modem Disconnects While Online Modem Cannot Connect When AnsweringFax and Data Software Can’t Run at the Same Time Modem Doesn’t Work with Caller IDFCC Part 68 Telecom Appendix a Regulatory ComplianceFCC Part 15 Regulation Canadian Limitations NoticeIndustry Canada International Modem Restrictions EMC, Safety, and R&TTE DirectiveThailand Approval South African NoticeAppendix B Waste Electrical and Electronic Equipment 依照中国标准的有毒有害物质信息 Appendix C C-ROHS HT/TS Substance ConcentrationIntroduction Installation in Computers Using the Linux 2.4 KernelInstallation Steps Install the Kernel SourcesPrepare the Kernel Sources This command builds the driver package for Load the TI USB Driver Build and Install the TI USB Driver from the TGZ PackageDevice Files Uninstalling the TI USB Driver for 2.4 kernel versionsInstallation in Computers Using the Linux 2.6 Kernel Prepare the Kernel Sources This command builds the driver package for Load the TI USB 3410/5052 Driver Uninstalling the TI USB Driver for 2.6 kernel versionsInstalling the Hotplug Scripts Installation in Computers Using the Linux 2.6.20 KernelInstalling udev Rules Patching and Rebuilding the KernelInstalling the Firmware Images Appendix E Ascii Conversion Global Wizard Index