MRV Communications MR2228-S2C Forwarding Mode, Throughput, Flow Control, Out-of-Band Management

Page 38

Forwarding Mode

Store-and-forward

Throughput

Wire speed

Flow Control

Full Duplex: IEEE 802.3x

Half Duplex: Back pressure

Management Features

In-Band Management

Telnet, SNMP, or HTTP

Out-of-Band Management

RS-232 DB-9 console port

Software Loading

TFTP in-band, or XModem out-of-band

Standards

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3z and 802.3ab Gigabit Ethernet

IEEE 802.1D (Bridging)

IEEE 802.3x full-duplex flow control

ISO/IEC 8802-3

Compliances

Emissions

Industry Canada Class A

EN55022 (CISPR 22) Class A

EN 61000-3-2/3

FCC Class A

VCCI Class A

C-Tick - AS/NZS 3548 (1995) Class A

Immunity

EN 61000-4-2/3/4/5/6/8/11

Safety

CSA/CUS (CSA 22.2.950 & UL 1950)

EN60950 (TÜV/GS)

IEC 60950 (CB)

Glossary 10BASE-T

IEEE 802.3 specification for 10 Mbps Ethernet over two pairs of Category 3, 4, or 5 UTP cable.

100BASE-FX

IEEE 802.3 specification for 100 Mbps Ethernet over two strands of 50/125, 62.5/ 125 micron, or 9/125 micron core fiber cable.

100BASE-TX

IEEE 802.3u specification for 100 Mbps Ethernet over two pairs of Category 5 UTP cable.

1000BASE-LX

34

Image 38

Contents Stackable Fast Ethernet Switch Installation Guide Installation Guide Contents Appendix B Cables Overview Switch ArchitectureIntroduction 10BASE-T/100BASE-TX Ports Description of HardwareNetwork Management Options 1000BASE-T/SFP PortsStacking Ports Port and System Status LEDsPort Status LEDs Condition StatusPower Supply Receptacles System Status LEDsExpandability Features and BenefitsConnectivity PerformanceManagement Application Examples Introduction to SwitchingNetwork Planning Collapsed BackboneNetwork Aggregation Plan Collapsed BackboneRemote Connections with Fiber Cable Network Aggregation PlanMaking Vlan Connections Remote Connections with Fiber CableApplication Notes Making Vlan ConnectionsEthernet Cabling Installing the SwitchSelecting a Site Mounting Equipment ChecklistPackage Contents Optional Rack-Mounting EquipmentRack Mounting Attaching the BracketsDesktop or Shelf Mounting Attaching the Adhesive FeetInstalling an Optional SFP Transceiver Connecting Switches in a StackConnecting to a Power Source Connecting Switches in a Ring-topology StackConnecting to the Console Port Wiring Map for Serial CableDTE Port Making Network Connections Connecting Network DevicesConnecting to PCs, Servers, Hubs and Switches Twisted-Pair DevicesNetwork Wiring Connections Making Twisted-Pair ConnectionsNetwork Wiring Connections Fiber Optic SFP DevicesConnectivity Rules 1000BASE-T Cable RequirementsMbps Fast Ethernet Collision Domain Cable Labeling and Connection RecordsMbps Gigabit Ethernet Collision Domain Mbps Ethernet Collision DomainPage Power and Cooling Problems Appendix a TroubleshootingDiagnosing Switch Indicators Table A-1. Troubleshooting Chart Symptom ActionStack Troubleshooting InstallationIn-Band Access 10BASE-T/100BASE-TX Pin Assignments Appendix B CablesTwisted-Pair Cable and Pin Assignments Straight-Through Wiring Crossover Wiring1000BASE-T Pin Assignments Fiber Standards Cable Testing for Existing Category 5 CableAdjusting Existing Category 5 Cabling to Run 1000BASE-T Appendix C Specifications Safety Forwarding ModeManagement Features In-Band Management ThroughputBandwidth 1000BASE-TAuto-Negotiation CollisionSwitched Ports Media Access Control MACRJ-45 Connector Ieee 802.3ab