Minicom Advanced Systems 116 IP Initial settings Default IP address, Connecting the CAT5 cables

Page 14

SMART 116 IP

10.3Connecting the CAT5 cables

1.Connect one connector to the RoC/RICCs RJ45 port.

2.Connect the other connector to one of the Smart 116 IP’s Computer ports.

3.Follow the above 2 steps for each computer.

10.4Connecting a KVM console

To operate the system locally, connect a KVM console to the Smart 116 IP:

1.Connect the monitor’s connector to the Smart 116 IP’s Monitor port.

2.Connect the keyboard’s connector to the Smart 116 IP’s Keyboard port.

3.Connect the mouse’s connector to the Smart 116 IP’s Mouse port.

10.5Connecting the power supply

1.Connect the Smart 116 IP to the power supply using the Power cord provided. Only use the power cord supplied with the unit.

2.Switch on the servers/computers.

11. Initial settings - Default IP address

The following sections provide instructions for setting the IP address for the Smart 116 IP unit.

By default, Smart 116 IP boots with an automatically assigned IP address from a DHCP (Dynamic Host Configuration Protocol) server on the network. The DHCP server provides a valid IP address, gateway address and subnet mask.

To identify the IP address, the Smart 116 IP MAC address appears on the underside of the Smart 116 IP box. The device number (D.N.) can also be found there.

If no DHCP server is found on the network, Smart 116 IP boots with the static IP address:192.168.0.155.

Note! If a DHCP server later becomes available, the unit picks up the IP settings from DHCP server. To keep the static IP address, disable DHCP – explained in section 13.1 on page 15.

11.1 Static IP addresses for a number of units

Where you want to connect more than 1 Smart 116 IP to the same network and there is no DHCP server, or you want to use static IP addresses, do the following:

13

Image 14
Contents Smart 116 IP User Guide Table of Contents Logging out Starting a remote session Troubleshooting Safe modeSwitching between computers OSDUpdate software Troubleshooting Trademarks Technical precautionsWelcome Key features IntroductionTerminology System componentsCompatibility Smart 116 IP unitLED and button table Pre-installation guidelinesConnector table Avoiding general rack mounting problems Rack mounting the Smart 116 IPConnecting the system Client computer operating systemConnecting to the network RoC/RICCsConnecting a RoC/RICC PS/2 Connecting a RoC/RICC USB Connecting a KVM console Initial settings Default IP addressConnecting the CAT5 cables Connecting the power supplyLogin Logging into the Web interface13.1 LAN Network ConfigurationSSL Certificate notes 13.2 KVM.netAdministration User Settings Saving changesView only AdministratorUser Adding a userBlocking a user Administration Switch ConfigurationDeleting a user Administration User Targets Install switch definition fileSecurity Settings Standard security policy High security policyMaintenance Firmware Upgrade Security SSL CertificateRestore Factory Settings Logging outStarting a remote session Remote console windowFull screen mode Taking over a busy remote sessionToolbar Switching to a different serverChanging the performance settings Adjusting the Video settings BandwidthRefresh Power cycle Keyboard key sequencesClick Start Recording Click Stop RecordingSynchronizing mouse pointers Advanced Mouse Emulation Examples23.9.3.1 USB Minicom icon menu features Mouse Emulation Dialog boxEntering Safe mode Troubleshooting Safe modeDisconnecting the remote session Restoring factory defaults Safe mode menuReboot Restoring the device firmwareKeyboard hotkeys Switching between computersOSD Selecting a computer OSD settings F2Navigating the OSD Supervisor Status S Administrator Status aSecurity User Status UAutoskip Activating password protectionChanging the OSD hotkey Serial portEditing the Switch name 26.4 F7 DefaultsPorts settings Time settings Time settings window UsersUsers settings window SecuritySecurity settings window OSD Help window F1Scanning computers F4 Tuning F5Please note Moving the label F6Connecting the RS232 Download cable System requirements for the Update softwareConnecting the Smart 116 IP System Upgrading the Smart 116 IP firmwareInstalling the software Starting and configuring the Update softwareSmart 116 IP Switch Update window Button or Box FunctionVerifying the version numbers Com Port Dialog boxObtaining new firmware Hardware version reportUpdate software Troubleshooting Resetting the Smart 116 IP or RoC/RICCsGet Status Setting default values for the OSDCommunication Error message Electricity failureTechnical specifications User guide feedback Video resolution and refresh ratesSafety Regional Offices
Related manuals
Manual 67 pages 7.17 Kb

116 IP specifications

Minicom Advanced Systems has made significant strides in the realm of data center infrastructure solutions, particularly with the introduction of the Minicom Advanced Systems 116 IP. This device is designed primarily for providing advanced control and management for IT professionals seeking robust and efficient ways to manage access to their server rooms and IT environments.

One of the standout features of the Minicom Advanced Systems 116 IP is its support for IP-based KVM (Keyboard, Video, Mouse) switching. This technology allows users to remotely access and control multiple servers from a single workstation, eliminating the need for physical access to each machine. This is particularly beneficial in large data center environments, where time and space efficiency are critical.

The 116 IP model offers a high-resolution video output, supporting resolutions up to 1920x1200. This ensures that users can maintain the clarity of visual data while managing their systems remotely. The system is compatible with a myriad of operating systems, including Windows, Linux, and Mac, which makes it versatile for various IT environments.

Security is a paramount consideration for any organization dealing with sensitive data. The Minicom 116 IP incorporates advanced security features, including user authentication protocols and encryption mechanisms. This ensures that only authorized personnel can access the systems, reducing the likelihood of data breaches and unauthorized access.

Moreover, the device is equipped with hot-plugging capabilities, allowing users to add or remove servers without needing to power down the system. This feature enhances uptime and productivity, as administrators can make changes without disrupting ongoing operations.

In addition to its technical facets, the Minicom 116 IP is designed with user experience in mind. It features a user-friendly interface that simplifies the management of multiple servers, making it easier for IT staff to navigate between different machines.

Finally, the device is built for scalability, allowing organizations to expand their IT infrastructure as they grow. This flexibility means that the Minicom Advanced Systems 116 IP can adapt to increasing demands without necessitating a complete overhaul of existing systems.

In summary, the Minicom Advanced Systems 116 IP presents a suite of advanced features, including high-resolution output, robust security protocols, hot-plugging capabilities, an intuitive user interface, and scalable architecture, making it an ideal solution for modern data center management needs.