NAD manual Cisco Catalyst Blade Switch 3020 for HP, Page 5 of

Page 5
Cisco Catalyst Blade Switch 3020 for HP

Design Guide

Cisco Catalyst Blade Switch 3020 for HP

This section briefly describes the Cisco Catalyst Blade Switch 3020 for HP and explains how the blade servers within the HP c-Class BladeSystem are physically connected to the switching modules.

The Cisco Catalyst Blade Switch 3020 provides enhanced Layer 2 services (known as Layer 2+ or Intelligent Ethernet switching) to the HP c-Class BladeSystem. The Cisco Catalyst Blade Switch 3020 enhances basic Layer 2 switching by including Cisco proprietary protocols, access control lists (ACLs), and quality of service (QoS) based on Layer 3 information. With Simple Network Management Protocol (SNMP), command-line interface (CLI), or HTTP management options available and a robust set of Cisco IOS® Software switching features, the Cisco Catalyst Blade Switch 3020 naturally integrates into the data center environment. The following features highlight this capacity:

●Loop protection and rapid convergence with support for Per VLAN Spanning Tree Plus (PVST+), IEEE 802.1w, IEEE 802.1s, Bridge Protocol Data Unit (BDPU) Guard, Loop Guard, PortFast, UplinkFast, and Unidirectional Link Detection (UDLD)

●Advanced management protocols, including Cisco Discovery Protocol, VLAN Trunking Protocol (VTP), and Dynamic Trunking Protocol (DTP)

●Port Aggregation Protocol (PAgP) and Link Aggregation Control Protocol (LACP) for link load balancing and high availability

●Support for authentication services, including RADIUS and TACACS+ client support

●Support for protection mechanisms, such as limiting the number of MAC addresses allowed or shutting down the port in response to security violations

Each Ethernet switch provides eight external Ethernet ports for connecting the blade enclosure to the external network. Four Small Form-Factor Pluggable (SFP) ports provide 1000BASE-SX interfaces and are shared with four of the copper Gigabit Ethernet links. Two additional copper Gigabit Ethernet ports are shared with two internal crossover interfaces connecting the pair of switches (labeled X-Crossovers in Figures 2 and 3). All of these ports can be grouped to support the IEEE 802.3ad LACP. Each blade server is connected to the backplane using the available Gigabit Ethernet network interface cards (NICs). The number of NICs on each blade server varies. Each server, whether it is full- or half-height, supports an additional Ethernet interface providing Integrated Lights Out (iLO) support.

Note: The iLO interface supports a management interface that resides on each server blade. For more information about the iLO system, refer to the “Management” section of this guide.

© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 5 of 28

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Integrating the Cisco Catalyst Blade Switch 3020 for the HP c-ClassBladeSystem into the Cisco Data Center Network ArchitectureContents Design Guide IntroductionHP c-ClassBladeSystem Enclosure Overview Design Guide Page 5 of Cisco Catalyst Blade Switch 3020 for HPSpanning Tree Cisco Catalyst Blade Switch 3020 FeaturesDesign Guide Traffic Monitoring Design Guide Figure 5. RSPAN Example Link Aggregation ProtocolsData Center Network Components Data Center Network ArchitectureAggregation Layer Access LayerDesign Goals High AvailabilityHigh Availability Design GuideHigh Availability for the Blade Servers Physical Port Count ScalabilityDesign Guide Slot CountOut-of-BandManagement ManagementDesign Guide In-BandManagementSerial Console Port Network Management Recommendations Design and Implementation DetailsRecommended Topology Primary root switch failure and recovery Additional Aggregation-SwitchConfiguration Configuring the Aggregate SwitchesConfiguring the Cisco Catalyst Blade Switch 3020s Alternative Topology Configuring the Cisco Catalyst Blade Switch 3020s Configuration DetailsConfiguring the Aggregate Switches VLAN Configuration Port-ChannelConfigurationRPVST+ Configuration Inter-SwitchLink ConfigurationTrunking Configuration Server-PortConfiguration Server Default Gateway Configuration Page 28 of RSPAN Configuration
Related manuals
Manual 20 pages 45.83 Kb

3020 specifications

The NAD 3020 is a classic integrated amplifier that has gained a legendary status among audiophiles since its launch in 1978. Known for its incredible sound quality and value for money, the NAD 3020 has become a reference point in the realm of affordable audio equipment.

One of the main features of the NAD 3020 is its high current design, allowing it to drive a wide range of speaker impedances. This capability ensures that the amplifier can deliver a dynamic sound, characterized by a robust bass response and clear treble. With a power output of 20 watts per channel into 8 ohms, the NAD 3020 is often underestimated due to its modest specifications. However, it can produce remarkable sound pressure levels and handle transient peaks with ease.

The amplifier utilizes a simplified circuit design, which is one of its defining characteristics. This minimalist approach reduces potential signal distortion, enabling the amplifier to maintain sonic integrity. The use of discrete components rather than integrated circuits contributes to its rich, detailed audio reproduction, making it a favorite among purists.

Another key technology featured in the NAD 3020 is its unique power supply design. NAD engineers incorporated a toroidal transformer, which is known for its compact size and low electromagnetic interference. This results in cleaner power delivery, which is essential for maintaining audio clarity and depth.

The NAD 3020 is also equipped with multiple inputs, including phono, line-level, and tape inputs, making it versatile for various audio sources. The built-in phono stage supports moving magnet cartridges, allowing vinyl enthusiasts to connect their turntables directly to the amplifier without needing a separate phono preamplifier.

In terms of build quality, the NAD 3020 features a sturdy chassis that minimizes vibrations, ensuring that audio performance remains stable. The user-friendly design includes a straightforward control layout, allowing users to adjust volume and tone settings with ease.

Throughout its decades-long legacy, the NAD 3020 has influenced countless audio products and remains a benchmark for entry-level amplification. Its combination of power, clarity, and affordability makes it a beloved choice for both new listeners and seasoned audiophiles seeking a dependable amplifier that doesn't compromise on sound quality. The NAD 3020 exemplifies how great engineering can lead to remarkable audio experiences, solidifying its place in the history of hi-fi audio.
Top Page Image Contents