Milan Technology MIL-SM4804G manual Connecting to the Console Port, Wiring Map for Serial Cable

Connecting to the Console Port 3

Connecting to the Console Port

The DB-9 serial port on the switch’s back panel is used to connect to the switch for out-of-band console configuration. The command-line-driven configuration program can be accessed from a terminal or a PC running a terminal emulation program. The pin assignments used to connect to the serial port are provided in the following table.

1 5

69

Figure 3-8 Serial Port (DB-9 DTE) Pin-Out

Wiring Map for Serial Cable

Table 3-1 Serial Cable Wiring

	Switch’s 9-Pin	Null Modem			PC’s 9-Pin
	Serial Port				DTE Port
2	RXD (receive data)	<----------------------------		3	TXD (transmit data)
3	TXD (transmit data)	-----------------------------	>	2	RXD (receive data)
5	SGND (signal ground)	------------------------------		5 SGND (signal ground)

No other pins are used.

The serial port’s configuration requirements are as follows:

•Default Baud rate—9,600 bps

•Character Size—8 Characters

•Parity—None

•Stop bit—One

•Data bits—8

3-9