The Switch can be easily monitored through panel indicators that assist in the identification of problems. This section describes common problems you may encounter and where you can find possible solutions.
Power
If the power indicator does not turn on when the power cord is plugged in, you may have a problem with the power outlet, or power cord. However, if it powers off after running for a while, check for loose power connections, power losses or surges at the power outlet. Or, you may try to unplug the power cord on the Switch, wait for five seconds and then reconnect. If you still cannot resolve the problem, call our technical support hotline.
Cabling
Verify that the cabling type is correct. Be sure all cable connectors are securely seated in the required ports. Use all standard unshielded
Product Specification
General Specification
Standard Compliance
Number of Ports
Data Transfer Rate
Network Cables
Topology
LED Indicators
Per Device
Per Port
IEEE 802.3
IEEE 802.3u & 802.3x
5X 10/100Mbps
Ethernet: 10Mbps(half duplex) 20Mbps(full duplex)
Fast Ethernet: 100Mbps(half duplex) 200Mbps(full duplex)
Unshielded
Star
Power
100Mbps, LINK/ACT
9