Milan Technology MIL-S500 manual Trouble Shooting, Installation

Page 8

	On	Green	The port is successfully connecting with the
	On	Green	device.
			device.

LINK/ACT Blinking			The port is receiving or transmitting data.

Off

The port does not link successfully with the device.

Apply self-adherent rubber feet to the bottom of the Switch near each of the four corners.

See Figure 6.

If applying Switch to metal surface, install magnets as shown in Figure 6. Switch may then be installed on a metal surface.

Plug in power adapter.

Trouble Shooting

Image 8

Contents MIL-S500 User’s Guide 5-Port 10/100 Switch DOCUMENT WARRANTY Five-year Limited WarrantyCOPYRIGHT FCC STATEMENTTo Contact MiLAN Technology Copyright 2004 MiLAN Technology MiLAN Technology 1329 Moffett Park DrSunnyvale, CA United States of America Telephone +1.408.744.2775 Fax +1.408.744.2793 P/N 90000200 Rev CUser’s Guide Key FeaturesIntroduction Package Contents Figure 2. Package ContentHardware Description The Front PanelLEDs The Rear PanelFigure 4. Rear panel view of the MIL-S500 switch LED-Indicators5Figure 5. Front panel view of LED indications DC Power ConnectorTrouble Shooting InstallationProduct Specification PowerGeneral Specification CablingPerformance Specification Physical & Environmental SpecificationPage P/N 90000200 Rev C