Troubleshooting
Reduced Spray Or No Spray.
Possible Causes
1Bladder may be empty.
2The Lint Screen may be clogged.
3
4Pump may have lost prime.
5The Pump Belt may be broken.
Lift Here
Insert Screwdriver Blade Here
WARNING:
To reduce the risk of fire, electric shock or injury, unplug appliance from outlet before servicing.
Remedies
1Turn power OFF; refill tank with hot tap water.
2Clean out Lint screen page 7.
3Turn power OFF; remove tank and reseat tank.
4Turn power OFF; after 1 minute, turn ON and depress Spray trigger.
5Turn power OFF and unplug
from the outlet. To check if a Pump Belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the Belt Access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. You should be able to see the Pump Belt looped around the motor shaft. If it is broken or missing, please refer to the part numbers and descriptions on page 15 before calling Consumer Services. Complete installation instructions will accompany the replacement belt.
DirtLifter PowerBrush Does Not Turn.
Possible Causes
1The Brush Belt or Pump Belt may be broken.
Remedies
1Turn power OFF and unplug
from the outlet. To check if a Brush Belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the Belt Access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. If broken, refer to
pages
13
4/18/05 9:20:06 AM |