Maintenance/Storage
1.Turn Power switch OFF.
2.Unplug power cord from the outlet and coil around Power Cord Quick Release.
3.Remove and rinse tools in clean, running water, let dry and replace in tool caddy.
4.Coil flex hose through storage brackets.
5.Remove
Flex Hose Storage Bracket
Power Cord Quick Release
6.Rinse out the
7.Wipe all exterior surfaces with a soft cloth.
8.Store cleaner upright in a protected, dry area.
9.When carpet is dry, vacuum again to remove hair and fuzz that the POWERSTEAMER may have loosened.
1.Turn the machine off and unplug from wall outlet.
2.Stepfloor. on the release pedal and recline the handle down onto
3.Remove the
4.Remove Belt Access Door located near the ReadyTools Dial. Insert a flat head screwdriver into the slot nearest to the handle and gently prying the access door off.
5.Turn the machine onto its side so the belt access area is facing upward.
6.On the bottom of the machine, near the belt access area, is a Red Retainer Plate that holds the black brush arm and brush in place. Using a Phillips head screwdriver remove the screw that holds the Red Retainer Plate in place. Set Red Retainer Plate and Phillips head screw aside.
NOTE: For 1693 Model series, remove stationary brush (skip step 6 and 7)
7.Remove the black brush arm that holds the brush in place. Set the black brush arm aside.
8.Remove the “toothed” Brush Belt from the Brush then from the Red Pump Pulley. Set the “toothed” Brush Belt and Brush aside.
9.Locate and remove the broken Pump Belt.
WARNING:
To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
CAUTION:
PowerSteamer uses water and must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.
23
45
67
89
11
4/18/05 9:20:04 AM |