PowerSteamer is not picking up solution and water, Remedies

PowerSteamer is not picking up solution and water.

	Possible Causes		Remedies
1	ReadyTools Dial may be at the	1	Set ReadyTools Dial to either FLOOR
	wrong setting for cleaning job.		CLEANING or TOOLS/PRETREAT.
2	Nozzle Window may not be properly attached.	2	Make sure the two tabs on the back
			of the Floor Nozzle Window are
			inserted through the mating slots in
			the main housing. Reinstall
			if necessary.

3Tank-in-Tank Lid is not properly installed.

3Reinstall lid; refer to The Basics section, page 6.

4Tank-in-Tank is not properly seated.

5Poor tool position. (Handheld attachments only)

6Tank-in-Tank has picked up the maximum dirty water.

4Tank-in-Tank must be firmly seated to function. Remove and reseat Tank-in- Tank.

5Readjust angle; apply more downward pressure.

6Empty tank and refill; refer to

The Basics section, page 6.

If you should happen to need assistance during assembly or operations, call 1-800-237-7691.

For information about repairs or replacement parts, or questions about your warranty, call:

Monday - Friday	8 a.m. — 10 p.m. ET
Saturday	9 a.m. — 8 p.m. ET

Or write:

BISSELL HOMECARE, INC

PO Box 3606

Grand Rapids MI 49501

ATTN: Consumer Services

Or visit the BISSELL website - www.bissell.com

When contacting BISSELL, have model number of unit available.

Please record your Model Number: ___________________

Please record your Purchase Date: ___________________

NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the

14event of a warranty claim. See "About Your Warranty" on page 16 for details.

ug310-5907_1692-1694_205.indd 14

4/18/05 9:20:06 AM