Packing List | Milan Technology MIL-S3570 specification

2. Installing the Switch

The switch is designed to operate in workgroup environments without a complicated

configuration procedure. It also features an auto-select 100-240V, 50/60Hz power supply unit, which works in most countries around the world.

Before connecting the supplied power cord into the switch, check to see that the cord voltage and current rating conform to the standards of the country of operation.

2.1Packing List

•One switch unit

•One AC power cord

•One RS232 console cable

•19-inch rack mount kit

•CD for installation guide, software modules, MIB file and software operation manuals

2.2Panels

The following figure illustrates the major components on front and rear panels:

10/100 Port 1-12 10/100 Port 13-24 Gigabit Slot1 Gigabit Slot2 LED indicators AC power switch AC power socket Console port

10BASE-T/100BASE-TX Port #1 - #12 10BASE-T/100BASE-TX Port #13 - #24 Gigabit Slot #1 for 1000BASE-FX module series Gigabit Slot #2 for 1000BASE-FX module series LED display for power and all port status Switch to turn on or off the power to the unit Plug-in socket for AC power cord

Connector for local console management connection