N-Tron 708M12 user manual Config, Save, Reset, Dongle, Info, Format, Model, Compare, Erase

CLI Commands, Continued…

Save or Reset the Configuration Settings

Command Name	config
Description	Save or reset configuration settings
Syntax	config s[ave] r[eset]
Parameters	save
	save current running configuration settings.
	reset
	reset configuration settings to factory defaults.
Examples	N-TRON/Admin> config save
	Save Settings...
	Settings have been saved.
	N-TRON/Admin> config reset
	Resetting to factory defaults...
	Load factory default settings [y/n]?y
	Keep IP, subnet mask, and gateway addresses [y/n]?y
	Keep current user names and passwords [y/n]?y
	…
NOTES
Dongle Operations
Command Name	dongle
Description	Perform dongle operations
Syntax	dongle info format [-m model] compare erase
Parameters	info
	Show information about the dongle (factory access only).
	format
	Format the dongle to factory default (factory access only).
	-m model
	Dongle model number: 1=At32K or 2=At64K (default)
	compare
	Compare the configuration on the dongle to the switch.
	erase
	Erase the switch configuration on the dongle.
Examples	N-TRON/Admin> dongle compare
	Comparing dongle configuration...
	The configurations are identical.
	N-TRON/Admin> dongle erase
	Erasing dongle...
	Dongle erase completed.
NOTES

Revision 071108 Page 84 of 102