N-Tron 708M12 user manual Show or Set System Configuration, Characters must be enclosed in quotes

CLI Commands, Continued…

Show or Set System Configuration

Command Name	System
Description	Show or set System configuration. If no parameters are specified, this command will
	show the System configuration (same as -show parameter).
Syntax	system [-show] [-name label] [-browser state]
Parameters	-show
	Show configuration.
	-name label
	Set the switch name.
	-browser state
	Set the browser access status to e(nabled) or d(isabled).
Examples	N-TRON/Admin> system -name "Private Switch" -browser disabled
	IP Configuration : Static
	Client ID (hex)	: 0007affbe400
	IP Address	: 192.168.2.214
	Subnet Mask	: 255.255.255.0
	Gateway	: 192.168.1.9
	MAC Address	: 00:07:af:fb:e4:00
	System Up Time	: 0 days, 0 hours, 17 mins, 2 secs
	Name	: Private Switch
	Contact	: N-TRON Admin
	Location	: Mobile, AL 36609
	Browser Access	: Disabled
	Changes have been made that have not been saved.
	N-TRON/Admin>
NOTES	A switch name may only contain alphanumeric, space, ‗:‘, ‗-‗, ‗_‘, and ‗#‘ characters, and
	may not begin with a number, space, or underscore. A name with embedded space
	characters must be enclosed in quotes.

(Revised 2010-11-15) Page 138 of 156