N-Link – Status
The Status tab under the
If the switch is an
State:
Control Port:
Current
The port being used to convey control information. There must be a direct link between the Master and Slave Control ports. Use of media converters or other switches is not supported.
Partner Port:
The port being used for normal communication between the
Coupler Port:
Coupler Port State:
Status:
The port being used to establish a redundant path for Ethernet data transmission.
Blocking, Forwarding.
No errors will show "OK", otherwise a description of the Faults detected.
State:
MAC:
Coupler Port State:
Status:
Current
The MAC Address of the 
Blocking, Forwarding.
No errors will show "OK", otherwise a description of the Faults detected.
If switch is an
N-Link State:
Coupler Port:
Current
The port used to establish a redundant path for Ethernet data transmission. This port will be detected automatically.
Below is an example of
(Revised | Page 92 of 156 |