509FX Industrial Ethernet Switch Ordering Information
Eight 10/100BaseTX Ports, One Multimode 100BaseFX Fiber Optic Port | |
| Eight 10/100BaseTX Ports, One Singlemode 100BaseFX Fiber Optic Port |
Where: | A = A for Advanced Management Features, |
| or N for |
| XX = ST or SC, YY = 15, 40 or 80 for singlemode, blank for multimode |
| S = Standard Temperature Rating |
Specifications
Switch Properties |
|
Number of MAC Addresses: | 4,000 |
Aging Time: | 300 |
Latency Typ.: | 2.1 ∝s |
Backplane Speed: | 2.6Gb/s |
Switching Method: | Store & Forward |
Physical |
|
Height: | 2.3" |
Width: | 5.6" |
Depth: | 3.4" |
Weight: | 1.58 lbs |
35mm | |
Electrical |
|
Redundant Input Voltage: | |
Input Current: | 200 mA@24V |
Inrush: | 8.5Amp/0.7ms@24V |
Environmental |
|
Operating and Storage Temp: | |
| |
Operating Humidity: | 10% to 95% |
| (Non Condensing) |
Operating Altitude: | 0 to 10,000 ft. |
Shock and Vibration (bulkhead mounting) | |
Shock: | 200g @ 10ms |
Vibration/Seismic: | 50g, |
Reliability |
|
MTBF: | >2Million Hours |
Network Media |
|
10BaseT: | >Cat3 Cable |
100BaseTX: | >Cat5 Cable |
100BaseFX |
|
Multimode: | |
Singlemode: |
Fiber Transceiver Characteristics
Fiber Length: |
|
|
|
|
2km* | 15km** | 40km** | 80km** | |
TX Power Min: | ||||
RX Sensitivity Max: |
|
|
|
|
Wavelength: | 1310nm | 1310nm | 1310nm | 1550nm |
* Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable
Connectors
10/100BaseTX: Eight (8)
100BaseFX: One (1) SC or ST Duplex Port
Serial Configuration Port
Com Parameters: | 9600,n,8,1 |
Recommended Wiring Clearance | |
Front: | 4" (10.16 cm) |
Side: | 1" (2.54 cm) |
Regulatory Approvals
FCC Part 15 Class A, UL Listed 1604 (US & Canada) CLASS I, DIV 2, GROUPS A,B,C,D,T4A,
ATEX Zone 2, Category 3G, II 3G Ex nA IIC (0316686U) CE:
Contact Information
820 S. University Blvd., | Alte Steinhauserstr 19 |
Suite 4E | 6330 Cham / Zg |
Mobile, AL 36609 USA | Switzerland |
TEL: (251) | TEL: +41 41 7406636 |
FAX: (251) | FAX: +41 41 7406637 |
Website: |
|
Email: |
|
| REV 080618 |
®2008