.
. 2:
.
. 3: Move. .the .cursor .to .the .speaker(s) .you .want .to . change .the .configuration .for .using .the .arrow . keys .(LR, .C,SUR, .BK, .SUB). .Hit .‘SELECT’. .
The .options .available .in .this .menu .are: .
. ● . For .LEFT/RIGHT .(LR): .SMALL .or .LARGE
. ● For .CENTRE .(C): .SMALL, .LARGE .or .NONE .
. ● For .SURROUNDS .(SUR): .SMALL, .LARGE .or .
NONE .
. ●
. ●
The .SP2’s .default .factory .settings .as .shipped .are: .
. ● Left/Right .= .SMALL .
. ● Centre .= .SMALL .
. ● Surrounds .= .SMALL .
. ● Back .= .NONE .
. ● Subwoofer .= .YES .
If .only .one .back .speaker .is .chosen, .the .signal .will . be .present .on .the .BACK .LEFT .(RCA .jack) .OUTPUT . only. .
4:Once. .you .have .completed .selecting .the .set- tings .that .match .your .particular .speaker .sys- tems .please .move .the .cursor .to .the .(X) .and . press .SELECT .to .exit .this .menu. .When .using . the .remote .control .to .enter .these .selections, . press .the .“SAVE” .button .before .exiting .or .set- tings .will .be .lost.
any .system .which .you .expect .to .effectively .handle . the .low .frequency .dynamics .of .modern .motion . picture .soundtrack .sources .such .as .DVD .or .HDTV .
Explanation of ‘Xtra Bass’ Mode
In .the .Speaker .Setup .Menu, .under .the .SUB .head- ing, .there .are .3 .choices: .
. 1: None:. .no .subwoofer .attached .to .the .system.
. 2:
. 3:
NOTE 1: the. Xbass settings only show up in the menu if the front speakers are defined as ‘Large’. Otherwise, there are only two options, Yes and None.
NOTE 2: Xtra. Bass operation is only available with Stereo, Stereo5, Party, Pro Logic, PLII Music, and PLII Movie modes.
Setting the Speaker Crossover Frequency
1: First. .enter .the .main .menu .by .pressing .on .any . one .of .the .menu .buttons .(< ., .> .or .SELECT).
LARGE vs SMALL SPEAKER SETTINGS:
It .is .very .important .that .you .understand .what .is . meant .by .the .LARGE .and .SMALL .settings .in .this . menu. .They .do .not .refer .to .SIZE, .but .to .the .ability . of .the .particular .loudspeaker .system .to .handle .low . bass/low .frequency .information. .It .is .very .impor- tant .that .you .consult .your .loudspeaker .providers . instruction .manual .or .the .company .regarding .the . capabilities .of .your .particular .system .with .regard . to .low .bass/low .frequency .reproduction. .Please . note .that .all .THX .certified .loudspeaker .systems . are .SMALL .since .a .subwoofer .is .a .part .of .any .THX . certified .loudspeaker .system. .It .is .strongly .recom- mended .that .you .consider .using .a .subwoofer .for .
2: Next. .move .the .cursor .to .‘SP’. .Hit .‘SELECT’. .
You .are .now .in .the .Speaker .Menu.
3: Next. .move .the .cursor .to .‘XO’. .Hit .‘SELECT’ .
-.You .are .now .in .the .Crossover .Menu. .The . options .available .in .this .menu .are .either .NONE . or .40 .to .200 .Hz .in .10 .Hz .increments. .The . SP2’s .default .factory .setting .as .shipped .is .the . THX .standard .80 .Hz .crossover .frequency. .
11