Mercury 16, 8 user manual Daisy Chain Connection Diagram

Page 15

Mercury 8/16 User’s Manual

4.Daisy Chain Connection Diagram

Please use the attached 3 feet 3-in-one daisy chain Cable Kit to daisy chain the KVM Switch.

A.Connect Keyboard, Mouse and Monitor to the console port (white color block) of bank 1 KVM switch.

B.Use one end of 3-in-one Cable Kit to connect the daisy chain port of bank 1 and the other end for the console port (white color block) of bank 2 KVM switch.

C.Please repeat item B to daisy chain more bank as you want. But, the maximum daisy chain bank is eight levels.

D.Before chaining the slave bank up to six banks, you need a VGA extender between the fifth bank and the sixth bank to enhance the VGA signal.

If you would like to daisy chain 8 port and 16 port PS/2 KVM Switch together, the master bank must be 16 port PS/2 KVM Switch

Figure 4-1. Daisy Chain

13

Image 15
Contents Mercury 8 Table of Contents Introduction FeaturePackage Contents Model No Technical SpecificationsSystem Requirements System RequirementsPS/2 Cable Cable DiagramsPC Port Special Cable Daisy Chain Cable VGA CableHardware Installation Port PS/2 KVM SwitchRear Panel Connect the keyboard to the KVM Switch Connect PC Segment Bank LED Indication UsagePush Buttons PC port LED IndicationBelow are the different hot key commands Reset Button Bank button and any PC buttonTo select PC port ROM ReflashHotkey Example:Daisy Chain Daisy Chain Connection DiagramHot Plug ESC Quit Enter Complete TAB Next Insert Edit On Screen Display OperationESC Quit Enter NEW Password Scroll LOCK, Scroll Lock and R keys in order Troubleshooting Certifications CE CertificateRoHS PS/2 KVM Switch