Mercury 16, 8 user manual Connect the keyboard to the KVM Switch

Page 9

Mercury 8/16 User’s Manual

Step 2

Connect the monitor to the KVM Switch. Using the attached cable, or the one included with your monitor, connect it to the HDDB-15 female port on the back of the KVM unit labeled with the monitor symbol at the Console connector.

Figure 2-2. Connect Monitor

Step 3

Connect the keyboard to the KVM Switch.

Figure 2-3. Connect Keyboard

Step 4

Connect the mouse to the KVM Switch.

Figure 2-4. Connect Mouse

Image 9

Contents Mercury 8 Table of Contents Introduction FeaturePackage Contents Model No Technical Specifications System Requirements System RequirementsPC Port Special Cable Cable DiagramsDaisy Chain Cable VGA Cable PS/2 CableHardware Installation Port PS/2 KVM SwitchRear Panel Connect the keyboard to the KVM Switch Connect PC Push Buttons UsagePC port LED Indication Segment Bank LED IndicationBelow are the different hot key commands Reset Button Bank button and any PC buttonTo select PC port ROM ReflashHotkey Example：Daisy Chain Daisy Chain Connection DiagramHot Plug ESC Quit Enter Complete TAB Next Insert Edit On Screen Display OperationESC Quit Enter NEW Password Scroll LOCK, Scroll Lock and R keys in order Troubleshooting Certifications CE CertificateRoHS PS/2 KVM Switch