LED Status Indicators, Digital Audio Inputs

B100 TWO CHANNEL POWER AMPLIFIER

analog audio input signals.

•In B100-P models, which are equipped with a moving-magnet phono equalization module, the inputs labeled AUX1/PHONO accept moving magnet phono cartridge inputs. These inputs are NOT line level inputs in the B100-P and cannot be used as such.

LINE LEVEL ANALOG AUDIO OUTPUTS :

The Bryston B100 integrated amplifier comes equipped with 2 pairs of gold plated analog RCA jacks for out- puts: PREAMP OUT and RECORD OUT.

• PREAMP OUT is normally connected, internally, via the CONNECTED/SEPARATE switch, to POWER AMP IN

• RECORD OUT output is not affected by volume, balance or mute controls.

DIGITAL AUDIO INPUTS:

In the B100-DA model, which contains a stereo D/A converter module, there are 4 digital audio inputs avail- able.

Two TOSLINK optical inputs are selected by pressing the D3 (TOSLINK-1) or D4 (TOSLINK-2) buttons on the front panel (when in digital mode) or on the handheld remote.

Two SPDIF coaxial inputs can be connected to the B100-DA using the RCA input jacks labeled D1 and D2. To select these inputs first place the unit in digital mode by pressing the DIGITAL4Select button on the front panel (or the A/D button on the handheld remote) and then press the D1 or D2 button on the front panel or on the remote). When the green LED above the font panel DIGITAL4SELECT switch button in ON concurrently with either the D1 (CD), D2 (TUNER), D3 (TV) or D4 (VIDEO) LEDs, then digital mode is engaged.

Note: Whatever digital input was previously selected in Digital Mode will be automatically reselected upon re-entering Digital Mode (from Analog Mode). Similarly, when re-entering Analog Mode from Digital Mode the previously selected analog input will be automatically re-selected.

See also the DIGITAL-to-ANALOG CONVERTER OPTION section for more information.

HEADPHONE JACK:

There is a quarter inch headphone output jack available on the front panel of the Bryston B100 integrated amplifier. The headphone output is driven directly from the preamplifier section utilizing separate headphone buffers. Inserting the headphone jack mutes the loudspeakers automatically (indicated by the mute LED on the front panel turning red). The B100 PREAMP OUT is also muted.

You can adjust the volume setting of the headphones by using the volume control on the front of the B100 inte- grated amplifier. You may also utilize the remote control unit to adjust headphone volume. The headphones cannot be muted with the remote control unit or the front panel Mute. Only headphones with impedances of greater than 50 ohms should be used.

AUXILIARY IR INPUT:

This mono 1/8” (3mm) phone jack allows a direct connection to equipment whose remote control system pro- vides an output from their infra-red LED drive circuit. The signal connected to this jack, which is expected to be a 5 volt logic level, should be ≥2.5Vdc and ≤10Vdc. The tip of the phone jack is positive (+) and the ring is negative (-).

LED STATUS INDICATORS:

CLIPPING: This LED (light emitting diode) will flash RED when the output waveform is clipped thus indicating an overload condition.

MUTE:Lights RED to indicate the outputs are muted..

POWER: GREEN indicates normal operation RED indicates Standby

Blinking RED/GREEN a fault or thermal overload problem in the unit.

B100, B100-DA, B100-P, B100 specifications

Bryston, a Canadian audio company renowned for its high-performance audio products, offers an impressive line of integrated amplifiers, with the B100 series standing out for audiophiles. The B100, B100-DA, and B100-P models incorporate advanced features designed to deliver exceptional sound quality and versatility.

The Bryston B100 is a powerful integrated amplifier that combines the performance of a high-end power amplifier with a preamplifier's flexibility. It features an impressive power output of 120 watts per channel into 8 ohms, ensuring it can drive a wide range of speakers effortlessly. Its all-brass construction and meticulous engineering ensure low distortion and high reliability, which are hallmarks of Bryston products. Furthermore, the B100 employs a classic analog design that retains the warmth and character associated with traditional audio systems.

The B100-DA model enhances this already excellent foundation by integrating a high-quality digital-to-analog converter (DAC). This addition allows direct connections to digital sources, such as computers and streaming devices, supporting various digital formats with ease. The B100-DA features USB and optical inputs, eliminating the need for an external DAC while ensuring superb sound quality from digital sources. This combination of analog and digital capabilities makes the B100-DA an exceptionally versatile choice for modern audiophiles.

Adding to the lineup is the B100-P, which offers even more flexibility with an optional phono stage. This model is tailored for vinyl enthusiasts, providing a dedicated input designed to optimize the sound quality of vinyl playback. With the B100-P, users can connect their turntables directly, enjoying the rich, warm sound that only analog vinyl can provide. This model further exemplifies Bryston’s commitment to accommodating traditional and contemporary audio setups.

All B100 models incorporate Bryston’s proprietary circuit designs that minimize noise and distortion, resulting in an ultra-clean audio signal. The robust build quality and attention to detail ensure longevity, with Bryston's renowned 20-year warranty adding peace of mind for users.

In summary, the Bryston B100 series represents the pinnacle of integrated amplifier design, catering to a diverse range of listening preferences and technologies while maintaining the high-fidelity audio performance that has become synonymous with the Bryston brand. Whether you choose the standard B100, the digital-friendly B100-DA, or the vinyl-focused B100-P, you are guaranteed a premium audio experience that is sure to impress.