Source Selector, Listening Level | Cary Audio Design Xciter manual

OPERATION

SOURCE SELECTOR

The Source Selector switch, located on the front panel, allows the selection of one of three input stereo source selections connected to the RCA input jacks on the rear panel. Simply rotate the knob of the selector switch to the desired input source.

LISTENING LEVEL

The Listening Level control, a potentiometer located in middle of the front panel, allows the adjustment of the listening level (or output volume). Simply rotate the knob of the control to either increase or reduce the listening level. Alternatively, the listening level can be remotely controlled. The Remote Control Operation sections details the use of the hand held remote for this function.

REMOTE CONTROL

The hand held remote control allows the convenient adjustment of both listening level and the mute function. Point the hand held remote toward the amplifier front panel and press the remote control Volume “-” button to reduce listening level or press remote control Volume “+” button to increase listening level. The listening level potentiometer is motorized and you will see the large Listening Level control knob physically move as you adjust the listening level.

Point the hand held remote toward the amplifier front panel and press the remote control “Mute” button to activate Mute. Press “Mute” button again to deactivate the Mute function. A red LED indicator lamp located between the Source Selector switch and the Listening Level control will illuminate when the Mute function is On. The LED will go off when the Mute function is Off.

The infrared (IR) sensor is located on the front panel between the Listening Level control and the Headphone On/Off switch. The IR sensor must be free of obstructions in order to receive the signals from the hand held remote. The remote must be pointed to the front panel of the amplifier to function correctly.

HEADPHONE FUNCTION

The Headphone On/Off switch, located on the front panel, allows the output of the amplifier to be switched from the speakers to headphone jack when the switch is rotated to the “On” position. When the switch is set to the “Off” position the output of the amplifier is switched only to the speaker jacks. The headphone jack is not functional while the speakers are operating and the speaker jacks are not functioning when the headphone jack is active. A blue LED indicator lamp located just above the Headphone Jack will illuminate when the Headphone Jack is On. The LED will go off when the Headphone function is Off.

The 3 circuit headphone jack accepts a ¼” diameter stereo plug. Be sure to plug your headphone plug securely into the headphone jack. The CAD Xciter is capable of driving nearly

any dynamic headphone set to very high levels. The Listening Level control should be turned to a low setting prior to listening with headphones to avoid potential exposure to excessively loud sound levels. The listening level can then be adjusted to a comfortable setting.

Xciter specifications

Cary Audio Design has long been synonymous with high-quality audio equipment, and their latest offering, the Xciter, is no exception. This advanced audio amplifier brilliantly combines cutting-edge technology with timeless design, making it a standout in any audiophile's setup.

One of the most notable features of the Xciter is its hybrid design, incorporating both solid-state and tube technology. This unique combination allows the amplifier to deliver a warm, rich sound characteristic of tube amplifiers while benefiting from the speed and precision of solid-state components. This synergy results in an audio experience that is both immersive and nuanced, perfect for critical listening sessions or casual enjoyment.

The Xciter boasts an impressive power output, capable of driving a wide range of speakers with ease. With an output of 125 watts per channel into 8 ohms, and even more at lower impedances, the Xciter can handle demanding music genres and maintain clarity without distortion. Cary Audio has also ensured that the amplifier provides ample headroom, allowing listeners to enjoy musical peaks without compromising fidelity.

Another key aspect of the Xciter is its advanced circuitry. The amplifier features a fully balanced design, which minimizes noise and increases detail in the audio signal. Additionally, Cary Audio has implemented high-quality components and meticulous circuit layout, ensuring that every note is rendered with precision and authenticity. The power supply is robust, providing stable energy to the amplifier for optimal performance.

User convenience is also a priority with the Xciter. The amplifier is equipped with a smart, intuitive control interface, allowing users to switch between various input sources seamlessly. Additionally, it features remote control access for easy adjustments from the listening position, enhancing the overall user experience.

Cary Audio Design has not overlooked aesthetics either. The Xciter showcases a sleek, modern design with a beautiful brushed aluminum finish and warm LED illumination. It is a piece of art that complements any decor while signifying the quality and sophistication of the audio equipment within.

In conclusion, the Cary Audio Design Xciter is a remarkable achievement in the world of audio amplification. With its hybrid technology, powerful output, advanced circuitry, user-friendly features, and stunning aesthetics, it stands as a testament to Cary Audio’s dedication to enhancing the listening experience. Audiophiles looking for a versatile and high-performing amplifier will find the Xciter to be a worthy addition to their audio arsenal.