Installation
Installing The TERK SR4X-MM Mirror-Mount Antenna (continued)
|
|
|
|
|
|
|
| XM Receiver (Tuner) | Antenna | |||||
|
|
|
|
|
|
|
| 1 | 2 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Green Case (Terrestrial)
TER
Curry Case (Satellite)
SAT
From TERK SR4X-MM
Mirror-Mount Anntena
Figure 6. Wiring diagram shows antenna connections to an XM receiver.
6.Turn on the XM system and tune the radio to channel one (i.e., the preview channel) to verify that the antenna is properly installed. If there are any problems, review the installation steps and verify that each one was performed correctly. Also see Troubleshooting below.
7.After the system has been tested successfully, continue routing the cables from the antenna to the receiver for best appearance and complete the remaining installation. Use the supplied cable tie wraps to secure cables from flagging in the wind and catching on objects.
NOTE: For additional help with cable routing, consult your local mobile audio dealer.
Use and Care
In normal daily use, the TERK
Troubleshooting
Symptom | Solutions |
XM radio displays “Antenna” | • Check antenna connections to the XM receiver. |
or “Check Antenna” message |
|
XM radio displays “No Signal” message
•Vehicle may be in an area where the XM signal may be too weak. Move the vehicle outdoors or to a location which has fewer buildings.
Other symptoms | • Call TERK for help at |
| business day, between 9 a.m. and 5:30 p.m., EST and |
| ask for Technical Support. |
8Installation/Use and Care/Troubleshooting