Troubleshooting
Problem: No sound output.
Possible Cause 1:TheAudiophile USB hardware or software device drivers are not properly installed.See the installation sections of this manual for further information.
Possible Cause 2:There is a resource conflict between your computer’s USB controller and another device in your computer (PC only). Check the Device Manager for your USB controller’s IRQ against those of the other installed devices. If necessary,change the settings for the one or more of the devices (refer to your computer or motherboard manual).
Possible Cause 3:Your application software has not been properly configured to use the Audiophile USB as its audio output device.
Possible Cause 4: Improper connections of the audio accessories.Verify that the Audiophile USB analog audio outputs are properly connected to a digital mix deck or external mixer/amplifier, or the S/PDIF Out is connected to an external digital audio device capable of receiving S/PDIF.
•Problem: I’m trying to record digital audio through the S/PDIF input but I don’t hear any output.
•Possible Cause:The settings in the Audiophile Control Panel may be incorrect. Double check that you have S/PDIF Input enabled and that your settings don’t exceed the bandwidth limitations of USB. Remember that the more inputs and outputs you have enabled, the lower the allowable sampling rate and bit depth.
Problem:The DeviceVolume control in Windows’ Sounds and Audio Devices (or other software such as MUSICMATCH Jukebox) is grayed out and does not function.
Possible Cause: Audiophile USB does not make its volume control parameter available to the host computer’s operating system. Use the Head Phone Level and Output Level knobs on the front panel of your Audiophile to adjust volume.
•Problem: No visual activity onAudio Input volume (VU) meters of user software.
•Possible Cause 1:The Audiophile USB input devices are not properly selected in the user’s application software.
•Possible Cause 2: Improper connections to audio accessories.
18