Cary Audio Design CAD 120S MKII owner manual Controls And Displays, Rear Panel

Page 9
REAR PANEL

CONTROLS AND DISPLAYS

REAR PANEL

1.RIGHT CHANNEL OUTPUT – NEGATIVE LEAD

2.RIGHT CHANNEL OUTPUT – POSITIVE LEAD

3.RIGHT CHANNEL INPUT – XLR INPUT

4.RIGHT CHANNEL INPUT – RCA INPUT

5.TUBE FUSE ½ AMP FAST BLOW RIGHT CHANNEL

6.BIAS ADJUST POTENTIOMETER RIGHT CHANNEL 130 – 150 ma.

7.AC POWER MAIN FUSE 4 AMP SLOW BLOW

8.TUBE FUSE ½ AMP FAST BLOW LEFT CHANNEL

9.BIAS ADJUSTMENT POTENTIOMETER LEFT CHANNEL 130 – 150 ma.

10.LEFT CHANNEL INPUT – RCA INPUT

11.LEFT CHANNEL INPUT – XLR INPUT

12.LEFT CHANNEL OUTPUT – POSITIVE LEAD

13.LEFT CHANNEL OUTPUT – NEGATIVE LEAD

8

Image 9
Contents CAD 120S MKII Stereo Power AmplifierSpecifications TABLE OF CONTENTSService and Care WelcomeIMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 17.IMPORTANT SAFETY NOTE20.FCC INFORMATION FOR USER WELCOME Unpacking Warranty CardIncluded in the Boxes WELCOMESPECIFICATIONS CONTROLS AND DISPLAYS 1.POWER2.LEFT CHANNEL BIAS 3.RIGHT CHANNEL BIASREAR PANEL CONTROLS AND DISPLAYSPOWER ON / OFF SWITCH TRIODE OR ULTRA-LINEARMODE SWITCHBIAS MEASUREMENT AND ADJUSTMENT OPERATIONTUBE REPLACEMENT BREAK-INPERIODOPERATION CARE AND CLEANING SERVICE AND CAREFACTORY SERVICE NON-WARRANTYREPAIRSUNITED STATES LIMITED WARRANTY WARRANTY DISCLAIMEREXCLUSIVE REMEDY SHIPPING INSTRUCTIONS INTERNATIONAL PURCHASERS EXPORT MARKETS\Cary Audio Design UNITED STATES LIMITED WARRANTYCARY AUDIO DESIGN