M-Audio Conectiv Rear Panel, Front Panel, RCA Inputs Input A, Input B These RCA, Microphone Input

7

Rear Panel

8.RCA Outputs (OUTPUT A, OUTPUT B) – These are Conectiv’s main outputs. Connect these RCA jacks to a DJ mixer, amplified speakers, or another destination. The audio source for these outputs is determined by the Mix knobs (7).

9.	RCA Inputs (INPUT A, INPUT B) – These RCA	8		9	10
	input pairs accept stereo signals from a variety of
	devices including CD players and turntables. Use the
	Source Selector switches (1) to select what type of
	device you’ve connected to each of these input pairs.
10.	USB 1.1 Port (USB) – The USB port carries digital
		11	12		13
	audio to and from Conectiv and provides power to the

interface. Connect this jack to an available USB port on your computer.

11.Kensington Security Slot – This jack is compatible with Kensington security cables to protect your device from theft.

12.Grounding Connector (GROUND) – If you are using turntables, ground them by attaching their ground wire to this connector.

13.DC Power Jack (9V DC) – Conectiv can be powered using an optional DC power supply. This input only needs to be used when your computer cannot supply sufficient power over the USB bus, or when Conectiv will be used as a standalone dual phono preamp.

Front Panel

14.Headphone Jack – Connect your headphones to this 1/4” jack. The volume level of this output is controlled by the Volume knob (5) and the source is determined by the Cue knob (4).

Be careful when connecting headphones to this output. Conectiv features an extremely powerful headphone amplifier designed to help DJs hear over the noisiest clubs and stages. Because of the high power design, the output may be extremely loud.

15.	1/4” Microphone Input	– This jack accepts a	14	15
	standard dynamic microphone with a 1/4” TS plug. The
	Mic knob (6) controls the gain level of this input.

User Guide