connector on the rear of your computer system. The video output connector on your computer may be either in a location similar to Figure
·Attach the power cord to the monitor and plug it into an AC outlet.
·The monitor is now ready for use.
Section 3 - Monitor Controls and LEDs
Figure 3-1 Controls and LEDs
A
1
B
2
3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
1.Power Indicators: LEDs A and B indicate the state of the Monitor.
•LED A On (green) Normal operations.
•LED A flashing DPMS
•LED B On (orange) DPMS “OFF” mode.
2.Power Switch:Push to turn the monitor ON, push again to turn the monitor OFF.
3.Trapezoid: Adjusts the angle of the sides of the display to make the display rectangular.
4.Pincushion Adjusts the curvature of the sides of the display to make the sides straight.
5.
6.
7.
8.
4