Section 4 - Troubleshooting
No picture, no LEDs lit.
•Check that the AC cord is plugged into an outlet and the monitor.
•Turn on the Master Power switch.
No picture, power LED is lit.
•Monitor is in DPMS STANDBY/SUSPEND mode. Press a key or move the mouse.
•Check that video cable is connected completely.
•Adjust brightness and contrast controls.
•Check connector for bent pins.
No picture, power saving indicator (2) on.
•Monitor is in DPMS OFF mode. Press a key or move the mouse.
•Monitor is off. Press front panel On/Off switch.
•Check connector for bent pins.
Image is not centered
•Adjust Vertical Position and Horizontal Position controls.
6