MaxTech K56Plus, 56K BPS, V.34+ Hardware Configuration Plug and Play, Configuring in Windows

Page 5

4.Carefully slide the internal modem into the slot you have chosen, applying even pressure until the modem is completely seated in the slot.

5.Fasten the retaining bracket with the screw from the slot cover. Make sure the modem is properly aligned. Store the slot cover for future use.

6.Replace the computer cover and plug in your computer.

7.Connect the telephone cable from the modem's LINE connector to the telephone wall jack.

8.Optionally, connect your telephone to the modem's PHONE connector.

9.Turn your computer on. Your modem is now installed.

2.4 Hardware Configuration (Plug and Play)

Your modem is configured using the Plug and Play (PnP) capabilities of your computer. Plug and Play is a set of specifications that define the ability for the computer hardware and operating system to auto- matically configure all compliant devices that are in- stalled, relieving the user of the need to determine which addresses and interrupts to use for each device. Consult your PC's owner's manual to determine if it is PnP Revision 1.0a compliant. You most likely have a Plug and Play Revision 1.0a compliant system if it was purchased after June 1994 or if the BIOS is dated after June 1994.

Proceed to one of the following sections, de- pending on your system's configuration:

•Section 2.4.1 if you are running Windows 95 (with or without a Plug and Play PC)

•Section 2.4.2 if you are running Windows 3.1x or DOS on a PnP-compliant PC.

•Section 2.4.3 if you are running DOS or Windows 3.1x on a non-PnP PC.

2.4.1Configuring in Windows 95

The version of Windows 95 you have will deter-

mine which set of dialog boxes is presented to you when installing the modem in Windows 95. Proceed to one of the following sections, depending on your Windows 95's diaglog box:

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 56K BPS Page Unpacking Your Modem Section Two InstallationSection One Introduction Proceed to .3 now if you have every- thing required Hardware InstallationConfiguring in Windows Hardware Configuration Plug and PlayWindows 95 Release 4.00.950 B Windows 95 ReleaseConfiguring in a Non-Plug and Play System Software Installation and ConfigurationConfiguring in a Plug and Play System with- out Windows Where To Go From Here Testing Your Modem After InstallationUsing Your Modem Executing Commands Section Three AT Command SetCommand Structure Basic AT CommandsLow speaker volume Commands are echoedEnable Autoscan mode Touch-tone dialingExtended AT Commands Power on or reset Force DSR Signal High onRatio CTS operates per flow controlMNP/V.42/V.42bis Commands Section Four S Registers Fax Class 1 CommandsS Registers Register Function Range/units DefaultSection Five Result Codes Modem does not respond to commands Section Six TroubleshootingModem does not dial Modem dials but does not connectHigh pitch tone is heard whenever you answer the phone Section Seven Support and ServiceFCC Compliance Appendix a SpecificationsAppendix C Notices DOC Compliance Information FCC Class B StatementUL Notice

V.34+, K56Plus, 56K BPS specifications

MaxTech 56K BPS, K56Plus, and V.34+ are modem technologies that revolutionized data transmission in the late 1990s, allowing users to connect to the Internet at unprecedented speeds. As internet usage skyrocketed during this period, the need for faster, more efficient modem standards became paramount. MaxTech, a prominent player in the telecommunications industry, was at the forefront of this evolution.

One of the standout features of MaxTech 56K modems is their ability to exploit the existing telephone infrastructure for faster data transmission. The 56K BPS technology specifically allowed for download speeds of up to 56 kilobits per second, leveraging a combination of digital signal processing and advanced modulation techniques. This was a significant leap from the earlier 33.6K modems, providing users with enhanced access to online content, file downloads, and multimedia experiences.

K56Plus, another critical technology developed during this era, improved upon the 56K standard by enabling modems to achieve higher speeds in optimal conditions. It utilized both analog and digital transmission paths to maximize throughput, making it more versatile and efficient than its predecessors. This adaptability allowed for better performance in varied line conditions, something essential for comprehensive Internet use.

V.34+, an enhancement of the V.34 modem standard, introduced better error correction and modulation schemes, ensuring more reliable and robust connections. This technology featured improved handling of data corruption and transmission errors, which was vital for maintaining stable internet connectivity during longer sessions, particularly for those downloading large files or streaming audio.

In terms of characteristics, MaxTech modems were known for their user-friendly interfaces and plug-and-play capabilities, making installation a seamless experience for a majority of users. These modems also incorporated technologies such as V.42 error correction and MNP protocol, further enhancing the reliability of data transmission.

Overall, MaxTech 56K BPS, K56Plus, and V.34+ mark a significant chapter in the history of internet connectivity. They provided a foundation for the broadband revolution that followed by pushing the limits of dial-up technology. Their advanced features and robust performance paved the way for an era of enhanced online experiences, shaping the way users interacted with the digital landscape for years to come.
Top Page Image Contents