
SECTION 4
System Set
PTZ Menu
Pan / Tilt / Zoom control (for Pelco D or Pelco P Model Cameras only)
PTZ (enter Password)
|
|
|
|
|
| Setup PTZ |
|
|
|
|
|
|
| Channel: | 1 |
|
|
|
|
|
| ID: | OFF |
|
|
|
|
|
| Protocol: | |
|
|
|
|
|
| Baud Rate: | 2400 |
| Pan/Tilt/Zoom |
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
| Focus |
|
|
| PTZ Controller Set | ||
| Setup |
|
|
| |||
|
|
|
| ID: | 1 | ||
| PTZ Controller Set |
|
|
|
| ||
|
|
|
|
| Model: |
| |
|
|
|
|
|
| ||
|
|
|
|
|
| Baud Rate: | 9600 |
|
|
|
|
|
| Save & Exit |
|
1.PAN / TILT / ZOOM: Accesses the PTZ Control for a camera. Press the K and L buttons to highlight, and press the SEL button to access PTZ controls:
•LEFT/RIGHT - Pans the camera LEFT/RIGHT
•UP/DOWN - Tilts the camera UP/DOWN
•VOL UP/DOWN - Zooms the camera IN/OUT
•SEL/MENU - Stops viewing / Exits viewing
2.FOCUS: Accesses the Focus Control for a camera. Press the K and L buttons to highlight, and press the SEL button to access FOCUS controls:
•UP/DOWN - Focuses NEAR/FAR
•SEL/MENU - Stops/Exits Menu
3.SETUP: Setup of the PTZ Cameras. Press the K and L buttons to highlight, and press the SEL button to enter the SETUP menu:
•CHANNEL: Select the PTZ camera location (Channel
•ID: Set the camera ID
•Protocol: Select the PTZ Protocol
•Baud Rate: Select the Baud Rate for the Camera (2400, 4800 or 9600 BPS)
•SAVE & EXIT: Saves any changes, and exits to the previous menu.
Setup PTZ |
|
Channel: | 1 |
ID: | OFF |
Protocol: | |
Baud Rate: | 9600 |
|
|
Revision 1.0 | 37 |