SECTION 4
IP Set
Network Set
The options in the IP Set menu control the local network setup for the Unit. See 45 for additional
network setup instructions.
•DHCP: Press the K and L buttons to highlight, and press the ←→ buttons to set to NO/YES. Set this option to YES to allow the unit to get Network information from the Router; set this option to NO if information will be manually assigned to the DVR unit.
•IP ADDRESS: Press the K and L buttons to highlight, and press the SEL button to enter setup. Use the Numbers on the front panel of the DVR to set the IP address.
•GATEWAY: Press the K and L buttons to highlight, and press the SEL button to set to enter setup. Use the Numbers on the front panel of the DVR to set the Gateway address.
DHCP: | NO |
IP Address: | ###.###.###.### |
Gateway: | ###.###.###.### |
Netmask: | ###.###.###.### |
DNS Server: | ###.###.###.### |
DVR Port: | 2000 |
Webserver Port: | 0080 |
Save & Exit |
|
|
|
•NETMASK: Press the K and L buttons to highlight, and press the SEL button to set to enter setup. Use the Numbers on the front panel of the DVR to set the Net Mask.
•DNS SERVER: Press the K and L buttons to highlight, and press the SEL button to enter setup. Use the Numbers on the front panel of the DVR to set the DNS Server address.
•DVR PORT: Press the K and L buttons to highlight, and press the SEL button to enter setup. Use the Numbers on the front panel of the DVR to set the DVR Port to 2000.
•WEBSERVER PORT: Press the K and L buttons to highlight, and press the SEL button to enter setup. Use the Numbers on the front panel of the DVR to set the Webserver Port to 0080.
•SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the K and L buttons to highlight, and press the SEL button to accept the changes.
Revision 1.0 | 39 |