Chevrolet Camaro, Pontiac Bonneville | Metra Electronics 99-3009

CHEVROLET Camaro 1993-96

Disconnect the negative battery terminal to prevent an accidental short circuit. Remove

(2)Phillips screws from the top of the driver's side knee bolster. Remove (2) 7mm screws from the bottom of the knee bolster. Open the glove box, remove (3) 7mm screws exposed on the right edge of the radio trim bezel and remove the bezel. Remove (2) 7mm screws securing the left side of the factory head unit and (1) 10mm nut securing the right. Slide the unit from the dash and disconnect the wiring.

"A"

Cut and remove all mounting tabs on the Radio Housing EXCEPT tabs "A". The mounting tabs can be identified by the stamped letter on the back of each tab. Skip to the Installation Instructions for ALL VEHICLES on Page #5.

A)Strip wire ends back ½"

B)Twist ends together

C)Solder

D)Tape

Locate the factory wiring harness in the dash. Metra recommends using the proper mating adaptor and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit).

Fig. A

Fig. B

"A"

"B"

PONTIAC Bonneville 1994-99

Fig. C

Fig. D

Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the right side of the dash trim bezel. Unclip the left side of the bezel and remove. Remove (3) 7mm hex-head screws securing the factory head unit and disconnect the wiring.

"C"

Cut and remove all mounting tabs on the Radio Housing EXCEPT tabs "C". The mounting tabs can be identified by the stamped letter on the back of each tab. Skip to the Installation Instructions for ALL VEHICLES on Page #5.

FIREBIRD 1994-99, TRANS AM 1994-99, BONNEVILLE, GRAND AM, GRAND PRIX: Re- connect the battery terminal and test the unit for proper operation. Mount the head unit/ki t assembly to the sub-dash with (3) 7mm hex-head screws previously removed in step #1. (Run the upper-left screw through the dash plastic for the Grand Prix). (see Fig. A)

SUNFIRE: Re-connect the battery terminal and test the unit for proper operation. Mount the head unit/kit assembly to the sub-dash with (1) 7mm hex-head screw previously removed in step #1 ("A") and (1) Phillips Pan-head Screw supplied ("B"). (see Fig. B)

FIREBIRD 1993, TRANS AM 1993: Re-connect the battery terminal and test the unit for proper operation. Mount the head unit/kit assembly to the sub-dash with (4) 7mm hex-head screws previously removed in step #1. (see Fig. C)

CAMARO 1993-96:Re-connect the battery terminal and test the unit for proper operation. Mount the head unit/kit assembly to the sub-dash with (2) 7mm hex-head screws previously removed in step #1 and (1) Carriage Bolt and (1) Keps Nut supplied. (see Fig. D)

99-3009 specifications

The Metra Electronics 99-3009 is a versatile and innovative dash kit designed specifically for the installation of aftermarket head units into select vehicles. This product has gained attention in the car audio community due to its combination of functionality, ease of use, and aesthetic appeal.

One of the main features of the Metra 99-3009 is its OEM-style design, which seamlessly integrates with the factory dashboard. This ensures that vehicle aesthetics are preserved while allowing enthusiasts to upgrade their audio systems. The kit is engineered for a precise fit, thus minimizing gaps and presenting a polished look that rivals factory installations. Its durable construction ensures longevity and resistance to wear and tear.

Another notable aspect of the 99-3009 is its compatibility with a wide range of vehicles. Designed to fit various models from brands like Ford, Lincoln, and Mercury, it allows drivers to personalize their sound experience without compromising their vehicle’s originality. The kit accommodates both single-DIN and double-DIN head units, providing flexibility for consumers looking to customize their audio systems.

The Metra 99-3009 comes equipped with an array of necessary mounting hardware, facilitating a straightforward installation process. This is particularly beneficial for DIY enthusiasts who might not have extensive technical experience. The inclusion of detailed instructions makes it easy for anyone to follow, ensuring that the installation can be completed with minimal hassle.

In terms of technology, the kit supports the installation of advanced audio features including Bluetooth connectivity, Apple CarPlay, and Android Auto, all of which are increasingly popular in today’s aftermarket head unit options. This enables users to enjoy modern conveniences such as hands-free calling, navigation, and streaming music, enhancing the overall driving experience.

Furthermore, the Metra 99-3009 includes provisions for the retention of factory features, such as steering wheel controls and auxiliary inputs. This is critical for users who wish to maintain functionality while upgrading their audio systems.

In summary, the Metra Electronics 99-3009 dash kit is an essential tool for anyone looking to enhance their vehicle's audio capabilities. Its OEM-style design, broad compatibility, ease of installation, and support for modern audio technologies position it as a leading choice in the car audio aftermarket. With the 99-3009, users can achieve a professional-grade installation that combines functionality with an attractive aesthetic, making it a must-have for automotive audio enthusiasts.