Metra Electronics 99-3009 installation instructions Pontiac Grand Am, Radio Housing Except tabs C

PONTIAC Trans Am / Firebird 1994-02

PONTIAC Grand Am 1996-98

1	2
	"C"
Disconnect the negative battery terminal to	Cut and remove all mounting tabs on the
prevent an accidental short circuit. Unclip	Radio Housing EXCEPT tabs "C". The
the radio trim bezel. Remove (4) 7mm hex-	mounting tabs can be identified by the
head screws securing the factory head unit	stamped letter on the back of each tab. Skip
and disconnect the wiring.	to the Installation Instructions for ALL
	VEHICLES on Page #5.

ALL VEHICLES

1

Disconnect the negative battery terminal to prevent an accidental short circuit. Remove

(2)Phillips screws from the pocket. Remove

(2)Phillips screws above the instrument cluster. Unclip the dash trim bezel and remove. Remove (3) 7mm hex-head screws securing the factory head unit and disconnect the wiring.

2

"C"

Cut and remove all mounting tabs on the Radio Housing EXCEPT tabs "C". The mounting tabs can be identified by the stamped letter on the back of each tab. Skip to the Installation Instructions for ALL VEHICLES on Page #5.

3

PONTIAC Grand Am 1999-00

Fig. A

*OPTIONAL

Fig. B

2-SHAFT HEAD UNITS: Slide the aftermarket head unit into the kit and secure with shaft

1

Illustration not available when printed

2

"C"

nuts. (see Fig. A)

DIN HEAD UNITS: Insert the Spacer* into the Radio Housing. Slide the DIN cage into the kit and secure by bending the metal locking tabs down. Slide the aftermarket head unit into the cage until secure. (see Fig. B)

5

Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the radio trim bezel. Remove (3) 9/32" screws securing the factory head unit and disconnect the wiring.

Cut and remove all mounting tabs on the Radio Housing EXCEPT tabs "C". The mounting tabs can be identified by the stamped letter on the back of each tab. Skip to the Installation Instructions for ALL VEHICLES on Page #5.

2