Introduction, Setup, Input & Output Connections

INTRODUCTION

Thank you for purchasing a Bryston B60 integrated amplifier. We are confident it will provide you with many years of musical enjoyment. We would welcome any suggestions or comments you may have regarding the operation of your Bryston amplifier.

Bryston recommends that you retain the original shipping box and packaging material for future use if required.

B60 INTEGRATED AMPLIFIERS

power to the amplifier turned OFF. Store them in a safe place for future use. These pre-out/power-in connec- tors provide for complete separation of the preamplifier and power amplifier sections. This allows you to easily accommodate the integration of a surround sound pro- cessor into your system and still maintain the control functions available on the front panel of the B60. It also allows the independent use of the stereo amplifier sec- tion within a multi-channel audio or video system.

SETUP:

You may place your B60 integrated amplifier in any convenient location, with one possible exception; if you own the remote-control version, position the amplifier to maintain a direct line-of-sight between the hand-held remote and the remote sensor eye located on the right side of the front panel. The amplifier is powered up by engaging the power toggle located on the front panel of the B60. The B60 will power-up momentarily with mute engaged, indicated by the pilot light turning red on the front panel. It will then quickly turn green signifying nor- mal function. If you have the remote control version of the Bryston B60 please refer to the section on the remote control unit.

INPUT & OUTPUT CONNECTIONS:

The Bryston B60 integrated amplifier comes equipped with 4 pairs of RCA input connectors, 1 pair of tape loop connectors, 1 pair of pre-out ~ power-in connectors and 1 pair of five-way binding post loudspeaker outputs. All input and output connectors are gold plated. Only cables with high quality gold plated connectors should be used with your amplifier to avoid noise and distortion from the corrosion which will eventually appear on poorly plated or gold-flashed cable connectors. Bryston offers high quality very low capacitance interconnect cables with custom RCA connectors gold-plated to 20 micro-inches (30 times heavier than standard gold-flashed cables). Standard 1 and 2 meter, or custom length cables, are available by contacting any authorized Bryston dealer or distributor.

CONNECTIONS:

Connect your loudspeakers, ensuring that the positive (red) and ground (black) terminals (gold-plated 5-way binding posts) on the Bryston B60 integrated amplifier are connected to the positive and ground terminals on your loudspeakers. Make certain the left and right speak- er outputs on the amplifier are connected to the appropri- ate left and right loudspeakers. Connect your CD player, tape deck and other sources to the appropriate left and right RCA inputs.

The tape loop may be used to insert a surround sound processor, tape deck or other recorder into your system. Plug your tape deck or external processor’s input cables into the ‘To Tape’ jacks and the processor or deck’s out- put cables into the ‘From Tape’ jacks on the rear of the B60. The tape or processor loop may be monitored via the toggle switch located on the front panel of the B60.

PRE-AMP OUT / POWER-AMP IN CONNECTIONS

On the rear panel there are connections labeled ‘PRE OUT’ (preamplifier output) and ‘PWR IN’ (power amplifier input). Please refer to the rear panel illustration later in this manual for further clarity). This feature allows you to separate the preamplifier section of the B60 from the power amplifier section by removing the ‘jumpers’. Simply pull the two ‘U’ connectors straight out with the

HEADPHONE JACK:

There is a quarter inch stereo (3 conductor) headphone jack available on the front panel of the Bryston B60 inte- grated amplifier. The headphone output is driven directly from the preamplifier section. We recommend the use of headphones with input impedances between 50 ohms and 600 ohms. Headphones with input impedance val- ues above 600 ohms may experience some problems attaining sufficient volume levels. The main outputs, both balanced and single-ended, will be muted when a phone plug is inserted into the headphone jack. TAPE outputs are not muted.

You can adjust the volume setting of the headphones by using the volume control on the front of the B60 integrated amplifier. You may also utilize the remote control unit to adjust headphone volume if your unit is so equipped. The headphones cannot be muted with the remote control unit. Use caution when disconnecting the headphones as the loudspeakers will be immediately re-connected at the volume level indicated by the front panel volume control.

TAPE LOOP:

Tape Outputs: The “TO TAPE” outputs are selected by the rotary “SELECTOR” knob and are provided as a

B60RDA, B60RP, B60R specifications

Bryston, a Canadian audio equipment manufacturer, is renowned for its high-quality amplifiers and audio components. The B60 series, comprising the B60R, B60RP, and B60RDA, showcases the company’s commitment to delivering exceptional sound quality and durability.

The Bryston B60R is an integrated amplifier designed for audiophiles seeking a compact yet powerful solution. This model delivers 60 watts per channel into 8 ohms and is equipped with Bryston's proprietary input circuitry that ensures minimal distortion and high fidelity. The B60R also features a robust Toroidal transformer, which provides stable power to the amplifier, resulting in dynamic sound reproduction across a wide frequency range.

Moving to the B60RP, it builds upon the strengths of the B60R but adds the convenience of a built-in phono stage. This makes it an ideal choice for vinyl enthusiasts who want to connect turntables directly without needing additional external components. The excellence in preamplification ensures that the warmth and depth of vinyl records are beautifully rendered, enhancing the listening experience.

The B60RDA model steps up the game further with a built-in DAC (Digital-to-Analog Converter), embracing the digital age of audio. This integrated DAC allows seamless connection to various digital sources, ensuring that streaming and digital files deliver the same warmth and clarity as analog formats. It also supports high-resolution audio playback, catering to listeners who value audio fidelity in all forms.

All models in the B60 series are built with Bryston’s renowned craftsmanship, featuring a solid aluminum chassis that minimizes vibration and interference. They also utilize high-quality components sourced from reliable manufacturers, ensuring longevity and performance consistency over the years.

One of the standout features across the B60 series is the versatility in connectivity options. With multiple inputs, including balanced XLR and unbalanced RCA, users can easily connect various sources, whether analog or digital. This flexibility, combined with the various power options, allows for integration into diverse audio systems, from highly customized setups to simple stereo applications.

In summary, the Bryston B60 series amplifiers, ranging from the classic B60R to the more feature-rich B60RDA, exemplify excellence in audio engineering. Each model is carefully crafted to deliver superior sound quality, whether for music lovers or serious audiophiles, making them a sought-after choice in the high-performance audio market.