Phono Equalization Module Optional | Bryston B60RDA, B60RP guide

recording output. This feed is unaffected by the opera- tion of other front panel controls.

Tape Inputs: The “FROM TAPE” (unbalanced RCA) inputs are useful for monitoring tape playback or pro- cessed signals. Moving the “Tape/Normal” toggle to Tape’ (up) position monitors the recorded signal on recorders equipped with a separate playback head, or the processed signal when using a signal proces- sor. Input sensitivity is 500mv, input impedance is 10K ohms.

PHONO EQUALIZATION MODULE (Optional) :

Bryston’s phono equalizer circuitry is available in both B60 and B60R integrated amplifiers. It features highly accurate equalization, extremely low noise and distortion and provides headroom margins sufficient to prevent overload from any known phono source. If your turntable provides a separate ground lead , system noise may be minimized by connecting it to the ground post adjacent to the phono inputs on the rear panel. Input impedance is 50K ohms and sensitivity is 5mV.

DIGITAL AUDIO INPUT MODULE (Optional) :

The B60DA / B60RDA models contain an SPDIF compatible digital audio input (RCA jack). To select this input set the rotary “SELECTOR” switch to the “DAC” position. Once this input is selected operation of the digital-to-analog convertor is fully automatic. The digital- to-analog convertor can handle input sample rates from 16KHz to 108KHz, and word lengths of 16, 18, 20 or 24 bits.

FRONT PANEL CONTROLS:

VOLUME CONTROL: Rotary control varies the out- put level to the ‘MAIN OUTPUTS’, (does not effect ‘TO TAPE’ outputs). BALANCE: Rotary control adjusts the left-versus-right channel levels.

BALANCE CONTROL: is a tailored-inflection type which has very gradual action near the center of rota- tion allowing fine adjustments to the stereo image. For convenience the electrical center of the control is detented.

SOURCE SELECTOR SWITCH: Rotary switch deter- mines which input will appear at the “TO TAPE” outputs for recording or processing, as well as determining which program is available at the Main outputs. (When the “TAPE/NORMAL” switch is in “Tape” position, “FROM TAPE” inputs appear at Main Outputs).

TAPE/NORMAL SWITCH: “ Normal ” position monitors

B60 INTEGRATED AMPLIFIERS

whichever input is selected at the rotary SELECTOR switch. “Tape” position provides monitoring of the “FROM TAPE input for A/B comparison with the source. Should an external processor or equalizer be connected in the tape loop, the ‘TAPE / NORMAL” switch will act as an in/out switch for the external equip- ment.

LOUDSPEAKER OUTPUTS:

Output connectors consisting of two pairs of red/ black 5-way binding posts, which can accept standard banana plugs, spade lugs, pins or bare wire. Since the binding posts are gold plated we recommend gold plat- ed connectors also be used on the speaker cables for optimum long term low distortion performance. we also recommend that loudspeaker wire of at least 16 gauge be used for maximum performance.

B60 REMOTE CONTROL

The Bryston B60 includes a hand held remote control unit. It pro- vides for remote volume control and full signal mute. the Volume control is a motor driven design.

This approach ensures lower dis- tortion and other noise artifacts than VCA’s and DAC’s.

Pressing the MUTE button on the remote control will fully mute the output from the preamplifier section. The power LED on the front panel will turn from green to red. To un-mute the amplifier sim- ply push the MUTE button again or

press the volume UP button.

The mute function on the remote

control will not function if using headphones.

The hand held remote unit is battery operated. To change the battery remove the bottom cover plate by unscrewing the Philip’s head screws and replace the 9 volt battery carefully observing the polarity of both the battery and battery clip.

We recommend maintaining a direct line-of-sight between the hand held remote and the front of the B60R to ensure the most efficient operation of the remote fea- tures.

B60RDA, B60RP, B60R specifications

Bryston, a Canadian audio equipment manufacturer, is renowned for its high-quality amplifiers and audio components. The B60 series, comprising the B60R, B60RP, and B60RDA, showcases the company’s commitment to delivering exceptional sound quality and durability.

The Bryston B60R is an integrated amplifier designed for audiophiles seeking a compact yet powerful solution. This model delivers 60 watts per channel into 8 ohms and is equipped with Bryston's proprietary input circuitry that ensures minimal distortion and high fidelity. The B60R also features a robust Toroidal transformer, which provides stable power to the amplifier, resulting in dynamic sound reproduction across a wide frequency range.

Moving to the B60RP, it builds upon the strengths of the B60R but adds the convenience of a built-in phono stage. This makes it an ideal choice for vinyl enthusiasts who want to connect turntables directly without needing additional external components. The excellence in preamplification ensures that the warmth and depth of vinyl records are beautifully rendered, enhancing the listening experience.

The B60RDA model steps up the game further with a built-in DAC (Digital-to-Analog Converter), embracing the digital age of audio. This integrated DAC allows seamless connection to various digital sources, ensuring that streaming and digital files deliver the same warmth and clarity as analog formats. It also supports high-resolution audio playback, catering to listeners who value audio fidelity in all forms.

All models in the B60 series are built with Bryston’s renowned craftsmanship, featuring a solid aluminum chassis that minimizes vibration and interference. They also utilize high-quality components sourced from reliable manufacturers, ensuring longevity and performance consistency over the years.

One of the standout features across the B60 series is the versatility in connectivity options. With multiple inputs, including balanced XLR and unbalanced RCA, users can easily connect various sources, whether analog or digital. This flexibility, combined with the various power options, allows for integration into diverse audio systems, from highly customized setups to simple stereo applications.

In summary, the Bryston B60 series amplifiers, ranging from the classic B60R to the more feature-rich B60RDA, exemplify excellence in audio engineering. Each model is carefully crafted to deliver superior sound quality, whether for music lovers or serious audiophiles, making them a sought-after choice in the high-performance audio market.